|
|
|
Damascus Knife: Damascus Kukri Style Knife with Stained Bone Handle
This is a beautiful handmade Damascus Kukri Style Knife with Orange Coloured Bone Handle.
Great Kukri Style Knife.
Only One of these knives were produced for us so a nice addition to the collection and unique.
A nice sized Knife with an overall length of approximately 28.5cm, with an 18cm blade made of 15N20 steel and almost 3cm wide at its widest point.
The handle is made From two slabs of stained cow bone which is approx 2cm at its widest point and it has a big Brass Waved Guard of approx 4" long. Pinned with two brass pins and a nice mosaic pin.
The knife has a Damascus Bolster and a beautiful pattern
These knives are all hand made using 15N20 Damascus steel folded 296+ times with handles made from natural materials from Sambar Deer Antler and stained Camel and Cow Bone.
Comes with a custom made shaped and patterned Brown leather sheath.
Only one of these made and available so this is the actual knife.
Any, what look like slight flaws in the handle are part of the natural material of Bone
SOS#003650
As each knife is handmade individually, the damascus pattern varies slightly from knife to knife.
*** Some facts about Damascus Steel ***:
Pattern welding or Damascening, the traditional method for making decorative patterns on forged products, originated some hundred years before Christ.
The process was first seen in Persia around 500 BC and used to produce welded blades. The laminate composition of a Damascus Steel blade is attained by alternating layers of soft malleable wrought iron and a hardenable and temperable steel with a high carbon content. The steel portion of the blade gives it strength and the ability to hold a fine edge, while the iron provides elasticity so it won't break when struck. The layering of the steel patterns revealed by etching the surface has been refined into a decorative art.
The term Damascus Steel itself comes from the European Crusades who came in contact with these superior weapons at the trading city of Damascus. When the technology spread across Asia into India it was called Wootz. The Japanese surpassed all other regions with their refinement of lamination techniques. Today the pattern-welding technique is used for the most exclusive knives and swords. The material choice is limited to steel types which are hot workable enough and possible to weld by forging. Stainless grades or tool steels are very difficult to work in this respect.
Two popular components with blade smiths these days, are 1095 and 15N20, with good reason. On their own, each steel would make a good choice for blades and the contrast between the two steels is excellent. The 1095, although a simple steel, has just the right amount of carbon to make a superior blade and the addition of manganese serves to aid the hardening process and makes it etch quite dark. The 15N20 has nearly as much carbon and has about 2.5% nickel content added to make the steel very tough. The second benefit of nickel is that it withstands the etch very well for a good contrast with its darker counterpart. Another benefit of these steels is that they can be differentially hardened for an extremely tough blade while still retaining a superior edge.
These knives are all hand made using 15N20 Damascus steel folded 296+ times with handles made from camel bone and/or Sambar Deer Antler.
They are works of art, are usable, practical and very collectable.