|
|
|
Damascus Knife: Big Damascus Bowie with Walnut Patterned Finger Guard Handle & Sheath
This is an older whopping great big handmade Damascus Bowie Knife with Walnut and Brass patterned Handle, Finger Guard an Mosaic Pin handle.
Overall length is a big 34cm long with a 21cm Blade and a 14cm Handle.
The blade is made of 15N20 steel. Has a 6mm Spine and is 4.5cm wide and is Full tang.
Big heavy weight Drop-point Bowie shape blade.
It has ornately-shaped brass hand guard with a Finger ring and a fat Walnut and Brass handle held with Brass and Blue coloured mosaic pins, Brass inlay and fileworked back with Red spacers through the handle.
It comes with a hand made dark brown leather belt sheath with some patterning on the front and a leg tie.
This Knife is all hand made using 15N20 Damascus steel folded 296+ times with a decorated Brass and Walnut Handle.
Only one of these available which is hand made with hand made characteristics.
*** Some facts about Damascus Steel ***:
Pattern welding or Damascening, the traditional method for making decorative patterns on forged products, originated some hundred years before Christ.
The process was first seen in Persia around 500 BC and used to produce welded blades. The laminate composition of a Damascus Steel blade is attained by alternating layers of soft malleable wrought iron and a hardenable and temperable steel with a high carbon content. The steel portion of the blade gives it strength and the ability to hold a fine edge, while the iron provides elasticity so it won't break when struck. The layering of the steel patterns revealed by etching the surface has been refined into a decorative art.
The term Damascus Steel itself comes from the European Crusades who came in contact with these superior weapons at the trading city of Damascus. When the technology spread across Asia into India it was called Wootz. The Japanese surpassed all other regions with their refinement of lamination techniques. Today the pattern-welding technique is used for the most exclusive knives and swords. The material choice is limited to steel types which are hot workable enough and possible to weld by forging. Stainless grades or tool steels are very difficult to work in this respect.
Two popular components with blade smiths these days, are 1095 and 15N20, with good reason. On their own, each steel would make a good choice for blades and the contrast between the two steels is excellent. The 1095, although a simple steel, has just the right amount of carbon to make a superior blade and the addition of manganese serves to aid the hardening process and makes it etch quite dark. The 15N20 has nearly as much carbon and has about 2.5% nickel content added to make the steel very tough. The second benefit of nickel is that it withstands the etch very well for a good contrast with its darker counterpart. Another benefit of these steels is that they can be differentially hardened for an extremely tough blade while still retaining a superior edge.
This type of knife are all works of art, are usable, practical and very collectable. As far as we are aware, there are only 1 in Australia.
Please note images which form part of the description and this is the actual knife.
We also have another similar knife which can be seen in the final image and at this link:
SOS#003500