Fixed Blade Knives

Please note that Sporting Outback Supplies have a strict policy only to sell knives to persons over the age of 18 years, and that by ordering and purchasing knives from Sporting Outback Supplies you warrant that you are over the age of 18 years and agree that you understand the rules and regulations in relation to knives in your own state or territory.

Items: 160 of 977, per page
  • New Old Stock absolute Mint and unused condition.

    *Please read full description and see detailed images AS WE AWAIT CLARIFICATION FROM BUSSE on this knife.

    *Based on the larger sized BUSSE Knife we have recently sold, we believe this is an original hard to find BUSSE USA Custom made Tactical Fixed Blade Knife.

    *To the best of our knowledge, We think this could be 'Badger Attack' model but are not 100% sure as they have quite a few custom models, but unlike the larger knife, this one does not have the usual BUSSE Stamp on the blade but does follow the same pattern, style, weight, shape and handle fittings so are sure based on the rest of the collection which were all originals, that it is also original but cannot say 100%.

    About BUSSE.

    Hand made in the USA.

    The World leader in extreme performance knives. Most powerful knives that have been unchallenged for more than 30 years. Cutting more than 2,770 pieces of 1” hemp rope without resharpening. Bending more than 35 degrees and coming back true without damage. Best rated warranty in the industry

    These knives do not ordinarily come with a sheath but we have managed to fit one which is a reasonable fit which is a SORD brand tactical MOLLE compatible sheath

     These knives are amazing and virtually indestructable.

    The BUSSE Blade:

    INFI is a proprietary steel and heat-treat protocol developed by Busse Combat Knife Co. and is ONLY available through Busse Combat.

    Busse Combat knives are often featured in movies and on television shows and series.  Whether the studio requests a custom designed blade for a specific character and purpose, or they simply use standard Busse knife models, it’s always fun to watch our favorite actors wielding a Busse knife.

    Screen Credits:

    The Avenger's Hawkeye fighting with his custom Hawkeye Dagger, The Walking Dead's Daryl Dixon fighting off zombies, or Grown Up 2's David Spade and his buddies sampling Busse knives in a store, Jack Reacher, NCIS, Underworld, Dual Survival, CSI, Justified, Man V's Wild, Revolution and Homefront are naming just a few of the movies and screen shows that thse BUSSE knives have made an appearance in.

    Model 

    Blade Steel: N690Co stainless steel
    Hardness: HRC 58-60
    Blade Coating: Muddy Brown Coating
    Handle: Tan/Brown Canvas Micarta 
    Blade Length: 15cm - 11.5"
    Overall Length: 29.5 cm - 11.5"
    Blade Thickness: Approx 0.5cm 1/4"
    Weight

    New and unused and has been in storage for some years and absolute mint condition

    We also have a Giant BUSSE model which we believe is a 'Battle Mistress' but again are not 100% certain which can be seen in the final image and at this link:

    https://www.sportingoutbacksupplies.com.au/busse-usa-custom-made-giant-fixed-blade-knife 

     SOS#005650

     

     

     

     

    • AUD$0.00
  • Now a discontinued and collectable model from 5.11 Tactical

    5.11 Tactical Knives: Wharn Surge Fixed Blade

    • AUD$149.00
  • Aitor COMMANDO Tactical Survival Combat Knife in Polymer Sheath
    • 11% less

    This is the legendary Quality Knife made in Spain by AITOR

    Aitor COMMANDO Tactical Survival Knife with Black Scabbard.

    *Please read full description and see detailed images which form part of the description.

    Stamped on blade is Aitor Commando A-163287.

    The knife is a really good quality heavy weight knife and is in almost mint unused condition with just a few small marks on the Scabbard where it has been on display and in and out of the scabbard.

    The legendary Aitor Commando survival knife originally designed together with the German manufacturer Mauser for the German army. Powerful ultra resistant knife for multiple extreme survival situations.
     
    With a 175mm blade and overall length of 310mm, this heavy duty miltiary/survival knife boasts a grippy ergonomic handle cast in robust magnesium-aluminium , powder coated with black epoxi and heat treated to 58Rc.
    The handle has a hollow capacity and comes complete with the standard Aitor survival kit enclosed by the heavy-duty screwed buttcap.  

    The 17.5-cm blade ground from 5-mm Cr Mo Va stainless bladesteel has a powdercoated satin-grey finish with a spear point, slight Spanish-style (shallow) reverse curve and a saw-back.

     

    Hardness 55/58 HRC

    The handle of the knife includes a small survival kit with Compass.

    The Scabbard also has a secret compartment which has slots for 4 x 5.56mm - 7.62mm NATO Rifle Cartridges (not included)

    One piece stainless construction with solid textured handle.

    Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.

    We also have an AITOR MAGNUM BOWIE which can be seen in the final image and also at this link:

    https://www.sportingoutbacksupplies.com.au/aitor-magnum-tactical-bowie-combat-knife-in-polymer-sheath

     

    • AUD$235.00
  • Aitor Jungle King 1 Black Tactical Combat Knife with Survival Kit
    • 5% less

    This is the legendary Jungle King I knife from the Aitor Jungle King knife series.

    Quality Knife made in Spain

    Black Tactical Version with Dark Green Scabbard.

    Considered by many experts as the best survival knife in the world, pioneering and unique, being one of the best in its category. Its design, versatility and functionality make it capable of adapting to any environment of extreme survival.

    Blade Length: 205mm

    Overall: 360mm

    Sheet thickness: 5mm

    Weight 1156 grams

    Double saw.

    Handle and pommel: Hollow pearl

    Hardness 55/58 HRC

    Includes quality heavy duty polymer scabbard with built in Sling Shot Prongs.

    The holster and handle Include some of the following survival accessories:

    -Fishing kit

    -Sewing kit

    -Scalpel

    -Dressings

    -Tweezers

    -Compass

    -SOS Mirror signals

    -Latex tube (slingshot)

    -Skinner multipurpose knife

    -Parra Cord

    14 1/4" overall.

    8" black powder coated stainless clip point blade with double cut sawback.

    Black finish knurled stainless handle.

    Black finish stainless guard with lashing holes.

    Stainless pommel unscrews to reveal a compass inside cap and small survival kit stored in clear acrylic tube in handle.

    O-ring sealed.

    OD green hard nylon belt sheath with leg ties.

    Sheath also stores a 7" overall skinner with 2 1/2" guthook blade.

    One piece stainless construction.

    Skinner features thumb ridge, ridged handle slot, lashing holes, flathead screwdriver end with bottle/can opener,

    OD green nylon lanyard.

    Also stored inside sheath is a pullout tray with latex powerbands for slingshot, empty vial and sharpening stone.

    Back of tray features ruler, S.O.S. signals and signaling mirror.

    Outside of sheath features several feet of OD green nylon cord and black coated stainless metal arms at tip of sheath that flip out to serve as slingshot.

    Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.

    We also have one of these in Silver which can be seen in the final image and also at this link:

    https://www.sportingoutbacksupplies.com.au/aitor-jungle-king-1-silver-tactical-combat-knife-with-survival-kit

     

    • AUD$425.00
  • Aitor Jungle King 1 Silver Tactical Combat Knife with Survival Kit
    • 5% less

    This is the legendary Jungle King I knife from the Aitor Jungle King knife series.

    Quality Knife made in Spain.

    *A few small storage marks on blade as can be seen in the detaile images.

    Silver Version with Dark Green Scabbard.

    Considered by many experts as the best survival knife in the world, pioneering and unique, being one of the best in its category. Its design, versatility and functionality make it capable of adapting to any environment of extreme survival.

    Blade Length: 205mm

    Overall: 360mm

    Sheet thickness: 5mm

    Weight 1156 grams

    Double saw.

    Handle and pommel: Hollow pearl

    Hardness 55/58 HRC

    Includes quality heavy duty polymer scabbard with built in Sling Shot Prongs.

    The holster and handle Include some of the following survival accessories:

    -Fishing kit

    -Sewing kit

    -Scalpel

    -Dressings

    -Tweezers

    -Compass

    -SOS Mirror signals

    -Latex tube (slingshot)

    -Skinner multipurpose knife

    -Parra Cord

    14 1/4" overall.

    8" black powder coated stainless clip point blade with double cut sawback.

    Silver finish knurled stainless handle.

    Silver finish stainless guard with lashing holes.

    Stainless pommel unscrews to reveal a compass inside cap and small survival kit stored in clear acrylic tube in handle.

    O-ring sealed.

    OD green hard nylon belt sheath with leg ties.

    Sheath also stores a 7" overall skinner with 2 1/2" guthook blade.

    One piece stainless construction.

    Skinner features thumb ridge, ridged handle slot, lashing holes, flathead screwdriver end with bottle/can opener,

    OD green nylon lanyard.

    Also stored inside sheath is a pullout tray with latex powerbands for slingshot, empty vial and sharpening stone.

    Back of tray features ruler, S.O.S. signals and signaling mirror.

    Outside of sheath features several feet of OD green nylon cord and black coated stainless metal arms at tip of sheath that flip out to serve as slingshot.

    Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.

    We also have one of these in Tactical Black which can be seen in the final image and also at this link:

    https://www.sportingoutbacksupplies.com.au/aitor-jungle-king-black-tactical-combat-knife-with-survival-kit 

     

    • AUD$425.00
  • AITOR Made in Spain HACHETA All Purpose Axe/Hatchet
    • 11% less

    AITOR Hatcheta made in Spain Hatchet/Axe

    *Please read full description and see detailed images which form part of the description.

    In unused almost mint condition and holding its original unsharpened edge.

    Nicely made with a Red Deer Stag motif etched in to the blade and a Rosewood Laminated Handle which is glued and pinned with 3 Brass Pins.

    INOX -High Carbon Stainless Steel 440-c Jungle Hatchet with a Precision Hollow-ground Blade.

    This Factory Mint Hatchet Is High Quality and has a Hollow-ground Blade made of INOX Chromium Molibdenum Vanadium Stainless Steel which is heat treated to a final Rockwell Hardness/HRC of 55/58.

    Handle is hand fitted Red " Stamina Wood ".Laminated Handle with Lanyard Hole

    This Hatchet has a Quality Brown Spanish Leather Sheath.

    This Hatchet Has an Engraved & Etched Aitor Logo With an Image of a 12 Point Red Deer Stags Head Depicted On The Blade Of The Axe!

    *Please note that there are a few storage marks on the leather cover which can be seen in the detailed images

    Full Length approx: 33cm

    Blade Length approx: 18cm

    Handle Length approx: 14cm

    Axe cutting Edge approx: 14cm

    Spine Thickness approx: 5cm

    Weight approx: 700grams

    Blade Hardness 55/58 HRC

    *Comes with its original leather belt cover which is hand made stitched and studded for extra strength.

    A really nice Spanish made Hatchet

    Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies. 

    We also have a Puma German Hatchet and an Australian made 'DEWEY' Hatchet with Stag Antler Handle which can be seen in the final image and also at this link:

    https://www.sportingoutbacksupplies.com.au/dewey-australian-made-hatchet 

    • AUD$245.00
  • Aitor Magnum Tactical Bowie Combat Knife in Polymer Sheath
    • 15% less

    This is the legendary Quality Knife made in Spain

    Big Magnum Bowie Tactical Version with Dark Green Scabbard.

    Considered by many experts as the best survival knife in the world, pioneering and unique, being one of the best in its category. Its design, versatility and functionality make it capable of adapting to any environment of extreme survival.

    12 1/4" overall Length.

    7 1/4" stainless bowie style blade with fileworked spine.

    Round palm-filling textured OD green polymer handle.

    Black powder coated cross guard and pommel.

    Lanyard hole. OD green hard nylon belt sheath with leg ties.

    Handle and pommel: Solid Olive Green Polymer and Alluminium Pommel

    Hardness 55/58 HRC

    Includes quality heavy duty polymer scabbard 

    One piece stainless construction.

    Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.

    We also have a Silver Aitor Jungle King I which can be seen in the final image and also at this link:

    https://www.sportingoutbacksupplies.com.au/aitor-jungle-king-1-silver-tactical-combat-knife-with-survival-kit

     

    • AUD$235.00
  • Aitor OSO NEGRO Tactical Bowie Combat Knife in Polymer Sheath
    • 12% less

    This is the legendary Quality Knife made in Spain by AITOR

    Aitor OSO NEGRO Bowie Tactical Version with Dark Green Scabbard.

    AITOR OSO NEGRO

    *Please read full description and see detailed images which form part of the description.

    Stamped on blade is Aitor OSO NEGRO A-164382.

    The knife is a really good quality heavy weight knife and is in almost mint unused condition with just a few marks on the blade where it has been on display and in and out of the scabbard.

    The legendary Black Bear knife from the Bear range of knives. Considered by many experts as the best in the world for its configuration, balance, handling and sharpening with a hardness of 55/58 HRC. Its robust blade, with a polyamide handle, brass fender and pommel. Used by the COE Special Operations Company.

    Blade (black chrome): 185mm

    Total Length: 310mm

    Thickness: 5mm

    Double saw Back.

    Hardness 55/58 HRC

    Round palm-filling textured Black polymer handle.

    Black powder coated cross guard and pommel.

    Lanyard hole. OD green hard nylon belt sheath with leg ties.

     

    Includes quality heavy duty polymer scabbard 

    One piece stainless construction.

    Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.

    We also have an AITOR MAGNUM BOWIE which can be seen in the final image and also at this link:

    https://www.sportingoutbacksupplies.com.au/aitor-magnum-tactical-bowie-combat-knife-in-polymer-sheath

     

    • AUD$225.00
  • Aitor ZAPADOR Jungle Knife in Black Polymer Sheath
    • 13% less

    This is the legendary Quality Knife made in Spain by AITOR and no longer available.

    Aitor ZAPADOR Jungle Knife with Black Polymer Scabbard.

    *Please read full description and see detailed images which form part of the description.

    Stamped on blade is Aitor ZAPADOR B-029102

    The knife is a really good quality heavy weight knife and is in almost mint unused condition with just a few small marks on the Scabbard where it has been on display and in and out of the scabbard.

    Bolo style Jungle Blade with full tang construction, solid guard and pinned with two alloy pins.

    Blade = 145 mm

    Handle = 105 mm

    Overall Length (inc. Black sheath) = 300 mm

    Weight (knife) = 339 g

    Weight (with sheath) = 447 g

    Includes heavy duty Polymer Sheath with leg ties

    Made in Spain

    Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.

    We also have an AITOR MAGNUM BOWIE which can be seen in the final image and also at this link:

    https://www.sportingoutbacksupplies.com.au/aitor-magnum-tactical-bowie-combat-knife-in-polymer-sheath

     

    • AUD$225.00
  • This is a great Budget Bowie Knife when the budget doesnt quite go to the Puma German Bowie Knife.

    This knife is a good quality alternative and a great usable knife for the field.

    Stainless Bowie Blade with a simulated Deer Antler Handle, Black nylon sheath and comes in the box.

    Great starter for the avid hunter or those with a taste for the Bowie shape blade and this one doesn't break the bank.

    Full tang construction. Simulated Deer Antler handle with three pins and alluminium guard.

    American Hunter Bowie Specifications:

    • 11" overall
    • 6.5" satin finish stainless clip point Bowie blade
    • Imitation stag handle
    • Full tang
    • Lanyard hole
    • Black nylon belt sheath

    Comes with Black nylon belt sheath and boxed.

    Now for those that want the top of the range and top quality German Puma Bowie Knife, check out  the final image and this link as a comparison.

    https://www.sportingoutbacksupplies.com.au/puma-knife-puma-current-model-bowie-handmade-knife-with-stag-antler-handle

    • AUD$79.00
  • Please read full description.

    This is a real beauty and we believe is a reproduction due to its almost mint condition but we cannot be sure as it came from a collection in the USA but has no markings so we are unsure of its origins apart from to say it is a real beauty and an unusual knife.This is a hand made knife with scabbard and we believe is either German or made in Sheffield England and looks like something from the mid 1800's or something you would see in the American Civil War ?

    Its almost new condition does however suggest a reproduction of a period knife.

    It is 32cm overall so is a big knife and has a double edged very sharp blade.

    The blade is approx 20.5cm long and the Coffin Handle is approx 11.5cm

    Heavy and well built it has a coffin shaped handle which is made from Black Buffalo Horn and pinned with 3 Brass Pins.

    Full tang construction with a silver cross guard and a leather and metal scabbard with hand stitching on reverse.

    It is the only one of these knives and design that we have ever seen. It has been well kept with just a few age marks on the sheath and blade and a couple of minor dings in the Buffalo Handle which can be seen in the images.

    (one mark near centre brass pin on handle which would polish out)

    We have described this knife to the best of our abilities with the information we have and the images form part of the description so please take the time to view the images.

    A really nice and unusual piece to add to the collection

    The knife comes with the high quality cowhide leather and metal sheath in the photos.

    PLEASE NOTE THAT AS THIS IS A DOUBLE EDGED KNIFE, LEGALLY, IT IS NOT PERMITTED IN THE A.C.T AND VICTORIA AND WE WILL NOT BE ABLE TO SEND TO YOU SO PLEASE DO NOT ORDER IF YOU ARE IN THOSE STATES.

    SOS#002690

    • AUD$0.00
  • Last of the really big Pig Spikes from Azero Knives.

    Made in Spain by AZERO knives from ACX-380 steel which has been hardened to 56-58 HRC the Spanish-made Azero Pig Spike is a laser cut full tang blade that is built tough for Australian conditions.

    With a Micarta handle made from many layers of resin, this handle is almost unbreakable and impervious to oil and humiditiy.

    Combined with a leather sheath and leg rope, this knife should be a part of every pig hunters kit.

    Total Length of knife is 14" (36cm)

    Blade length is 8.5" (21.5cm)

    Handle length is 5.5" (14cm)

    Thicness of blade is an incredible 5mm making it a hefty strong knife built for pigging.

    2 blood grooves on one side and a 3" (7.5cm) hilt to help prevent your hand from slipping forward when wet.

    Sheath: Black Leather dagger style sheath with AZERO Logo.

    Full tang construction for strength.

    Also see sku: SGB6818913W for the 13" and SGB6818915W for the 15" Puma SGB Pig Sticker knives

    Limited lifetime warranty against faulty workmanship.

    All sizes are approx.

    SOS#00195

    • AUD$0.00
  • Made in Spain by AZERO knives are made from ACX-380 steel which has been hardened to 56-58 HRC 

    ****Please note as this is a Double Edged Dagger, By State Law, we cannot supply this knife to those living in the ACT or Victoria****

    This is a big and beautifully made Double Edged Dagger in the style of a Gladiator or Grecian style blade. Double edged and with a beautiful Ebony hardwood handle.

    AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.

    Features:

    • ACX-380 stainless steel blade
    • Leather sheath
    • Handle material Ebony Wood

    Technical Specifications:

    • Overall Length: 340mm
    • Blade Length: 210mm (Double edged)
    • Weight: 440g

    We only have one of these and it has a very nice grain to the wooden handle.

    Limited lifetime warranty against faulty workmanship.

     

    • AUD$229.00
  • Made in Spain by AZERO knives are made from ACX-380 steel which has been hardened to 56-58 HRC 

    AZERO HDM Tactical, Bushcraft, Survival Knife in Molle Compatible Leg/Belt Sheath

    This is a fantastic Tactical/Bushcraft/Survival knife.

    One of the best solidly built knives we have seen with a 216mm non reflective blade and an overall length of 356mm and a spine of approx 5mm thick.

    Solid handle of HDM300 with 3 pins. Blade is full tang and 3 lashing points for use as a spear with the handle point also being used for a lanyard and it comes with a solid plastic lined Black Nylon Sheath with quick release belt attachment and leg fastener and spare pouch for torch or sharpener.

    AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.

    Features:

    • ACX-380 stainless steel blade
    • Cordura sheath with Molle system
    • Handle material HDM 300

    Technical Specifications:

    • Overall Length: 356mm
    • Blade Length: 216mm
    • Weight: 440g

    AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.

    We only have one of these.

    **There is one tiny mark on the blade that can be seen in the blade images from going in and out of the sheath**

    Limited lifetime warranty against faulty workmanship.

     We also have one of the Medium version of this knife which can be seen in the last image and at this link:

    https://www.sportingoutbacksupplies.com.au/azero-knives-hdm-medium-tactical-bushcraft-and-survival-knife.html?category_id=260

     

    • AUD$289.00
  • Made in Spain by AZERO knives are made from ACX-380 steel which has been hardened to 56-58 HRC 

    AZERO HDM Medium Sized Tactical, Bushcraft, Survival Knife in Molle Compatible Leg/Belt Sheath

    This is a fantastic Tactical/Bushcraft/Survival knife.

    One of the best solidly built knives we have seen with a 137mm non reflective blade and an overall length of 277mm and a spine of approx 5mm thick.

    Solid handle of HDM300 with 3 pins. Blade is full tang and 3 lashing points for use as a spear with the handle point also being used for a lanyard and it comes with a solid plastic lined Black Nylon Sheath with quick release belt attachment and leg fastener and spare pouch for torch or sharpener.

    AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.

    Features:

    • ACX-380 stainless steel blade
    • Cordura sheath with Molle system
    • Handle material HDM 300

    Technical Specifications:

    • Overall Length: 277mm
    • Blade Length: 137mm
    • Weight: 401g

    AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.

    We only have one of these.

    Any marks on the knife and handle are part of the manufacture of this knife.

    **Some storage marks on the box**

    Limited lifetime warranty against faulty workmanship.

     We also have one of the Big version of this knife which can be seen in the last image and at this link:

    https://www.sportingoutbacksupplies.com.au/azero-knives-hdm-big-tactical-bushcraft-and-survival-knife.html?category_id=260

     

    • AUD$269.00
  • Made in Spain by AZERO knives are made from ACX-380 steel which has been hardened to 56-58 HRC 

    This is a beautifully made full sized Hunting and skinning knife with a an exotic Ebony Hardwood Handle plus beautiful hand made leather sheath.

    Sheath can be worn vertically on a belt.

    AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.

    • Features:

      • Blade: ACX-380 stainless steel blade 115mm Length
      • Handle:  Ebony Exotic Hard Wood Handle
      • Length: 250mm overall length
      • Sheath: Dark Brown Custom Leather Sheath
      • Technical Specifications:
    • Length: 250mm overall length
    • Blade: 130mm
    • Handle:115mm
    • Blade Thickness 5mm

    We only have one of these and it has a very nice Exotic Ebony Hard Wood Handle.

    Limited lifetime warranty against faulty workmanship.

     We also have one similar knife left with a Sambar Deer Antler Handle which can be seen in the last image and at this link:

    https://www.sportingoutbacksupplies.com.au/azero-knives-hunting-knife-with-sambar-deer-antler-handle-and-leather-sheath.html?category_id=260

     

     

    • AUD$225.00
  • Made in Spain by AZERO knives are made from ACX-380 steel which has been hardened to 56-58 HRC 

    This is a beautifully made full sized sturdy Hunting and skinning knife with a an exotic Polished Sambar Deer Antler Handle plus beautiful hand made leather sheath.

    Sheath can be worn vertically on a belt.

    AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.

    • Features:

      • Blade: ACX-380 stainless steel blade 130mm Length
      • Handle:  Exotic Polished Sambar Deer Antler Handle
      • Length: 250mm overall length
      • Sheath: Dark Brown Custom Leather Sheath
      • Technical Specifications:
    • Length: 250mm overall length
    • Blade: 130mm
    • Handle:110mm
    • Blade Thickness 5mm

    We only have one of these and it has a very nice Exotic Sambar Deer Antler Handle.

    Limited lifetime warranty against faulty workmanship.

     We also have one similar knife left with an Exotic Ebony Hardwood Handle which can be seen in the last image and at this link:

    https://www.sportingoutbacksupplies.com.au/azero-knives-hunting-knife-with-ebony-wood-handle-and-leather-sheath.html?category_id=260

     

     

    • AUD$225.00
  • Made in Spain by AZERO knives are made from ACX-380 steel which has been hardened to 56-58 HRC 

    This is a beautifully made knife with a drop point style skinning blade and with an Olive Wood handle plus beautiful hand made leather sheath with Magnesium Firestarter.

    Sheath can be worn vertically or horizontally on a belt.

    AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.

    Features:

    • Features:

      • Blade: ACX-380 stainless steel blade 83mm Length
      • Handle:  Olive Hard Wood Handle
      • Length: 205mm overall length
      • Sheath: Black Leather sheath with magnesium firestarter

    Technical Specifications:

    • Length: 205mm overall length
    • Blade: 82mm
    • Handle:122mm

    We only have one of these and it has a very nicely figured Olive Hard Wood Handle.

    **Box has a few storage marks as seen in the images.

    Limited lifetime warranty against faulty workmanship.

     We also have one similar sized knife left of the Violet Palisander Hardwood Handle which can be seen in the last image and at this link:

     https://www.sportingoutbacksupplies.com.au/azero-knives-skinning-knife-with-violet-palisander-wood-handle-leather-sheath-and-firestater.html?category_id=260

     

    • AUD$129.00
  • Made in Spain by AZERO knives are made from ACX-380 steel which has been hardened to 56-58 HRC 

    This is a beautifully made knife with a drop point style skinning blade and with a beautiful Violet Palisander hardwood handle plus beautiful hand made leather sheath with Magnesium Firestarter.

    Sheath can be worn vertically or horizontally on a belt.

    AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.

    Features:

    • Features:

      • Blade: ACX-380 stainless steel blade 83mm Length
      • Handle:  Handle Violte Palisander Wood
      • Length: 205mm overall length
      • Sheath: Black Leather sheath with magnesium firestarter

    Technical Specifications:

    • Length: 205mm overall length
    • Blade: 83mm
    • Handle:122mm

    We only have one of these and it has a very nice grain to the wooden handle.

    **Box has a few storage marks as seen in the images.

    Limited lifetime warranty against faulty workmanship.

    We also have one similar sized knife left of the Black Micarta Handle which can be seen in the last image and at this link:

    https://www.sportingoutbacksupplies.com.au/azero-knives-skinning-knife-with-micarta-handle-leather-sheath-and-firestarter.html?category_id=260

     

     

    • AUD$129.00
  • Bear & Son Cutlery Guthook Hunter. USA Made Collectable.

    This knife is one of a collection of eight world-class knives in the NAHC

    (North American Hunting Club) Hunting Heritage Knife Collection.

    Comes with Certificate of Authenticity and Care Instructions.

    Full tang construction. Red stag bone handle with nickel-silver guard. 7 3/4" overall length with 3 1/2" 440 high carbon steel drop-point skinning blade with guthook.  With Hunting Heritage Collection artwork on one side of the blade.

    Comes with Black leather belt sheath.

    Handmade in Jacksonville, Alabama, USA.

    Bear & Son Cutlery a rich, family tradition in knife making.

    We have a skilled and experienced work force capable of performing many of the extra hand operations that go into the making of our products. The Bear & Son Cutlery factory is unique. It is full self-contained. While some companies only assemble parts brought from various suppliers and put their names on the product, we do everything in-house from building our own blanking dies to heat treating, grinding and assembly, and hand finishing our products. These steps ensure that Bear & Son Cutlery is of excellent quality and a real value for both the dealer and consumer.

    This commitment to excellence has just improved due to rich family tradition in knife making craftsmanship not only by management, but also our experienced work force. Our customers and consumers can look for even more new and exciting products as a result. Our ongoing commitment is to make them in America and make them affordable. We want everyone to be able to afford what we are proud to make!

    This commitment to excellence has just improved due to rich family tradition in knife making craftsmanship not only by management, but also our experienced work force. Our customers and consumers can look for even more new and exciting products as a result. Our ongoing commitment is to make them in America and make them affordable. We want everyone to be able to afford what we are proud to make!

     We also have Buck 103 Hunting Heritage Collection in stock. Here's the Link.

    SOS#OO2250

    • AUD$0.00
  • Bear & Son USA Made Hunting Knife with Rosewood Handle
    • 10% less

    Bear & Son Cutlery MGC Rosewood Trophy Hunter Knife.

    Made in USA.

    9 3/8" overall in length with a 5" polished stainless steel clip blade with rosewood handle.

    Pure nickel silver mirror polished finger guard and bolsters.

    Full tang construction for strength and durability.

    It comes with brown leather belt sheath with BEAR MGC stamp.
    Handmade in USA with limited lifetime manufacturer warranty.

    Bear & Son Cutlery a rich, family tradition in knife making.

    We have a skilled and experienced work force capable of performing many of the extra hand operations that go into the making of our products. The Bear & Son Cutlery factory is unique. It is full self-contained. While some companies only assemble parts brought from various suppliers and put their names on the product, we do everything in-house from building our own blanking dies to heat treating, grinding and assembly, and hand finishing our products. These steps ensure that Bear & Son Cutlery is of excellent quality and a real value for both the dealer and consumer.

    This commitment to excellence has just improved due to rich family tradition in knife making craftsmanship not only by management, but also our experienced work force. Our customers and consumers can look for even more new and exciting products as a result. Our ongoing commitment is to make them in America and make them affordable. We want everyone to be able to afford what we are proud to make!

    This commitment to excellence has just improved due to rich family tradition in knife making craftsmanship not only by management, but also our experienced work force. Our customers and consumers can look for even more new and exciting products as a result. Our ongoing commitment is to make them in America and make them affordable. We want everyone to be able to afford what we are proud to make!

     

    • AUD$175.00
  • Bear & Son USA Made Skinning Knife with Rosewood Handle
    • 10% less

    Bear & Son Cutlery MGC Sharpfinger Palm Skinner.

    7 1/8" overall in length with a 3 3/8" polished stainless steel upswept skinning blade with rosewood handle.

    Pure nickel silver pins.

    Full tang construction for strength and durability.

    The finger guard on this one is in the blade design.

    It comes with black leather belt sheath.

     Perfect for skinning and caping..

    Handmade in USA with limited lifetime manufacturer warranty.

    Bear & Son Cutlery a rich, family tradition in knife making.

    We have a skilled and experienced work force capable of performing many of the extra hand operations that go into the making of our products. The Bear & Son Cutlery factory is unique. It is full self-contained. While some companies only assemble parts brought from various suppliers and put their names on the product, we do everything in-house from building our own blanking dies to heat treating, grinding and assembly, and hand finishing our products. These steps ensure that Bear & Son Cutlery is of excellent quality and a real value for both the dealer and consumer.

    This commitment to excellence has just improved due to rich family tradition in knife making craftsmanship not only by management, but also our experienced work force. Our customers and consumers can look for even more new and exciting products as a result. Our ongoing commitment is to make them in America and make them affordable. We want everyone to be able to afford what we are proud to make!

    This commitment to excellence has just improved due to rich family tradition in knife making craftsmanship not only by management, but also our experienced work force. Our customers and consumers can look for even more new and exciting products as a result. Our ongoing commitment is to make them in America and make them affordable. We want everyone to be able to afford what we are proud to make!

    • AUD$175.00
  • BENCHMADE MEL PARDUE Hunting Knife with Sheath
    • 7% less
    BENCHMADE Rant *Mel Pardue* N690 Stainless Steel Fixed-Blade Knife.
    Fixed Blade knife.
    Mel Pardue design.
    8-1/2 inches long.
    N690 Stainless Steel blade etched with Benchmade logo on front, "N690", and "Mel Pardue Design" on back.
    Black rubberized handle."Taiwan" tang stamp.
    With original black woven nylon sheath with the 'Benchmade' Logo
    Knife can be disassembled if required by the rear bolt in the hilt of the handle
     
    Please see detailed images.
    Brand new, unused, unsharpened and untouched.
     
     
    • AUD$255.00
  • This is a Bigger and Older 'Used' German Made Bowie Knife Circa 1950's

    *Please read full description and see detailed images which form part of the description.
    Overall length of the knife is approx 27.5cm long with a Bowie Style Carbon Steel Blade of very solid construction.
    The Blade is approx 15.5cm long and 5cm Thick and 3.5cm wide at its widest point.
    It is an old knife with a Dull shine blade and is very sharp.

    At approx around the 70 odd years old, it shows some age with minor surface pitting on the blade and a few handling marks on the Pommel which can be seen in the images.

    Beautiful and solid one piece Deer Antler Handle with nice figuring and with spacers and a Brass Finger Guard.
    The knife is big and solid and is designed as a hunting knife and could probably tell a good story.
    It comes with a hand made solid leather belt sheath with securing stud which is stitched and riveted and is designed to be either a cross over right hand sheath or a left side fitting sheath.

    We generally would not put some of these older used knives on the website but at 70 years old, it is a classic, solid and well made German Hunting Knife and worthy of a good collector or owner looking for a character quality made knife.
    Only one of these has been made.

    SOS#001750

    • AUD$0.00
  • Black Jack Knives Anaconda I Japanese SEKI made Classic Bowie Knife with Leather Sheath
    • 5% less

    Original older Black Jack Knives New/Old stock absolute mint condition in original Black Basket Weave pattern Leather Sheath

    The blade is Japanese AUS8A steel. This knife was produced in the late 80's to early 90's  

    (One age mark on the back of the leather sheath as can be seen in the detailed image.)

    *Please read full description and see detailed images which form part of the description.

    This is a classic Black Jack Knives Large Bowie Knife and is the sought after ANACONDA 1 model.

    Rubberised handle with Black Paracord wrist strap.

    Almost mint condition, unused and in original sheath

    Full length is approx: 33cm. Hidden Tang construction.

    Blade Length: 20cm

    Handle: 13cm 

    Spine: 5mm Thick

    Made in SEKI Japan 

    Stamped on one side of the Blade is: BLACKJACK KNIVES JAPAN ANACONDA I

    Stamped on the other side is: BLACKJACK ANACONDA in the EMBLEM

    Comes in the original Basket Weave Black Leather Belt Sheath

    Knife Description:

    Technical Description:

    • This Anaconda I by Blackjack Knives features a satin finished clip point blade with a false top edge, 5/32" blade stock and 1 3/4" blade depth, hidden tang construction. The handle has a stainless steel guard and rubberised handle.
    • The knife is made in Japan and the sheath is stamped on the back : Made in USA.

    This is an older but new (old stock) Made in Japan BlackJack Classic Bowie Knife with a Leather sheath. 

     

     

     

    • AUD$345.00
  • A nice collectable mint unused condition Boker Solingen German Made 1918 WWI Trench Knife Reproduction

    One of a limited number made and this one is serial number #6017

    *Please read full description and see detailed images

    Totally unused and mint condition with a beautiful Deer Antler handle and in a period custom made Brown Leather sheath and a nice example of this classic Boker German 1918 Trench knife we have come across.

    Super Sharp with original factory edge.

    It comes with a nice quality custom made Brown leather Belt Sheath with Metal Tip

    Stamped on one side of the blade is the Tree motif and H.BOKER SOLINGEN 

    Almost mint condition and circa 2008

    A fine example 

    SPECIFICATIONS

    Overall Length: 10 1/8"
    Blade Length: 5 3/4"
    Blade Thickness: 5 mm
    Style:1918 WWI Repo Trench Knife
    Steel: C75 HC
    Hardness:57-59 
    Handle Material: Deer Antler (Either Red or Sambar Deer)
    Weight: 5.7OZ
    Made in: Germany
    Sheath: Custom Brown Leather with Securing Studs and Metal Tip


    During the positional war during the First World War and the resulting trench warfare, many of the insufficiently equipped soldiers developed auxiliary weapons, which were manufactured in field forges and workshops on and behind the front. In the course of the battles, however, it became clear that the soldiers' equipment and armament did not meet the requirements of this particular fighting style. In 1915 Boker was therefore commissioned by the Ministry of War to develop a compact combat knife that was ideally suited for precisely this purpose.

    The true-to-the-original Boker Trench Knife also has a stainless steel blade made of C75. This carbon steel with an enormous edge retention requires appropriate care today as it did then. The massive stainless steel crossguard, the old official tang stamp on the blade, the Satg Antler handle and the authentic sheath made of high-quality leather are also part of the original equipment. The knives are marked with a serial number.

    The history of Boker can be traced back to the 17th century. In the 1800’s the German tool maker was producing swords and other blades for use in the various wars that were going on in Europe at the time. In the1860’s the company had split with part of the family emigrating and setting up factories in America. The German and American factories produced similar products.  Both used the “Tree Brand” logo. The “Tree Brand” logo represents the giant chestnut tree that was at the front of the original Boker factory in Remscheid, Germany in the 17th century.

     

    • AUD$459.00
  • A rare and very collectable Boker Solingen German Made Tree brand Applegate/Fairbairn Combat Dagger in Desert Sand colours.

    Totally unused and almost mint condition in original Desert Camo Kydex Sheath and one of the best examples of these classic knives we have come across.

    *Please read full description.

    Super Sharp double edged Dagger blade.

    This is a double edged Dagger, and it cannot be shipped to ACT or Victoria due to state restrictions.

    Stamped on one side of the blade is the Tree motif and BOKER SOLINGEN with the number 1767 on the hilt.

    On the opposite side of the blade are the FairBairn Applegate signatures and the Boker Tree brand logo with BOKER SOLINGEN

    Excellent solid example of this classic BOKER Combat Dagger. 

    Almost mint condition with just a few very minor storage/handling marks as can be seen in the detailed images. 

    The various versions of the Boker Applegate-Fairbairn have been convincing special forces all over the world for years and have emerged as an icon among tactical knives. The knife goes back to the classic Fairbairn-Sykes dagger from World War II and was designed by Col. Rex Applegate. The elite soldier coordinated secret operations throughout Europe during the war and even became President Franklin D. Roosevelt's personal guard. He trained Allied Special Forces in close combat and founded the "School for Spies and Assassins" in today's Camp David. Later he continued to work as a consultant and trainer, wrote numerous books about close quarter combat and began to develop and improve the perfect combat knife.

    Fiberglass-reinforced Delrin handle with integrated stainless steel weights, black cross-guard and 440C blade steel. The blade has on the one side a typical double conical dagger grind and on the other side a hollow grind.

    SPECIFICATIONS

    Overall Length: 272 mm
    Blade Length: 150 mm
    Blade Thickness: 4.70 mm
    Style: Hidden Tang, Lanyard Hole
    Steel: 440C
    Hardness: 
    Handle Material: GFK
    Weight: 245 Grams
    Made in: Germany
    Sheath: Kydex 
    Colour: Desert Sand handle and Desert Camo Scabbard

    The history of Boker can be traced back to the 17th century. In the 1800’s the German tool maker was producing swords and other blades for use in the various wars that were going on in Europe at the time. In the1860’s the company had split with part of the family emigrating and setting up factories in America. The German and American factories produced similar products.  Both used the “Tree Brand” logo. The “Tree Brand” logo represents the giant chestnut tree that was at the front of the original Boker factory in Remscheid, Germany in the 17th century.

     

    • AUD$425.00
  • A very collectable Boker Argentinian (Arbolito Line) Made Tree brand Fixed blade Twin Set of knives with custom made Leather Sheath

    *Please read full description and see detailed images

    Totally unused and almost mint condition with the small knife having a beautiful Stag Antler Handle and the larger knife with a Stag and Cocobolo hard wood contoured handle and both knives fit in a custom made Red/Brown Molded Leather sheath and one of the best examples of this classic Boker set we have come across.

    Super Sharp with original factory edge and in mint unused condition.

    Stamped on one side of the blades is the Boker Tree Motif and Argentina on the other side

    Almost mint condition and circa 1990's early 2000

    SPECIFICATIONS

    Large Knife/ Small

    Overall Length: 20 cm/ Small 12.5cm
    Blade Length: 9cm/ Small 6cm
    Blade Thickness: 4.50 mm/ Small 3mm
    Style: Drop Point, Lanyard Hole
    Steel: 440C
    Hardness:57-59 
    Handle Material: Cocobolo Hard Wood and Stag Antler Handle/ Small Stag Antler Handle
    Made in: Argentina
    Sheath: Custom Red/Brown Leather fits both knives as a Piggy Back Set 

    Böker Arbolito knives are ideally suited as hunting knives, leisure knives as well as for outdoor use. Made in Buenos Aires, you can expect excellent knives with handmade leather sheaths and sharp blades.

    The history of Boker can be traced back to the 17th century. In the 1800’s the German tool maker was producing swords and other blades for use in the various wars that were going on in Europe at the time. In the1860’s the company had split with part of the family emigrating and setting up factories in America. The German and American factories produced similar products.  Both used the “Tree Brand” logo. The “Tree Brand” logo represents the giant chestnut tree that was at the front of the original Boker factory in Remscheid, Germany in the 17th century.

     We also have an original Boker AppleGate/Fairburn Combat Dagger available which can be seen in the last image and also at this link:

    https://www.sportingoutbacksupplies.com.au/boker-solingen-german-made-tree-brand-applegate-fairbairn-combat-dagger#product-details-tab-specification

    • AUD$295.00
  • A very collectable Boker Solingen German Made Tree brand Integral Fixed blade knife with custom made Leather Sheath

    *Please read full description and see detailed images

    Totally unused and almost mint condition with a beautiful Cocobolo hard wood contoured handle and in a custom made Red/Brown Molded Leather sheath and one of the best examples of this classic Boker Integral classic knives we have come across.

    Super Sharp with original factory edge.

    For those not familiar with the term INTEGRAL it means that where generally a normal full tang bladed knife is made, the bolsters are then put on either sides as seperate pieces. An Integral knife means that it is fully made out of one piece of steel including all the curves around and including the bolsters. Inetgral knives are generally seen as the hardest knives to produce starting with a fatter and larger piece of steel to enable the detail to be cut for a beautiful finish knife.

    Stamped on one side of the blade is the Tree motif and BOKER SOLINGEN GERMANY

    Almost mint condition and circa 1980-90's

    SPECIFICATIONS

    Overall Length: 19 cm
    Blade Length: 8.3 cm
    Blade Thickness: 4.70 mm
    Style: Integral, Lanyard Hole
    Steel: 440C
    Hardness:57-59 
    Handle Material: Cocobolo Hard Wood and carved and also has finger moulding
    Weight: 245 Grams
    Made in: Germany
    Sheath: Custom Red/Brown Leather 

    SOS#03950

    The history of Boker can be traced back to the 17th century. In the 1800’s the German tool maker was producing swords and other blades for use in the various wars that were going on in Europe at the time. In the1860’s the company had split with part of the family emigrating and setting up factories in America. The German and American factories produced similar products.  Both used the “Tree Brand” logo. The “Tree Brand” logo represents the giant chestnut tree that was at the front of the original Boker factory in Remscheid, Germany in the 17th century.

     We also have an original Boker AppleGate/Fairburn Combat Dagger available which can be seen in the last image and also at this link:

    https://www.sportingoutbacksupplies.com.au/boker-solingen-german-made-tree-brand-applegate-fairbairn-combat-dagger#product-details-tab-specification

    • AUD$0.00
  • A nice collectable Boker Solingen German Made Tree brand Nicker Fixed blade knife with custom made Leather Sheath. This is a traditional German JagdNicker (Hunters Trouser Knife)

    *Please read full description and see detailed images

    Totally unused and almost mint condition with a beautiful Deer Antler handle and in a custom made Black Leather sheath and a nice example of this classic Boker German JagdNicker knife we have come across.

    Super Sharp with original factory edge.

    It comes with a nice quality custom made Black leather Belt Sheath

    Stamped on one side of the blade is the Tree motif and BOKER SOLINGEN GERMANY 440c STAINLESS 521

    Almost mint condition and circa 1980-90's.

    A fine example and looks just as good on a Fruit or Cheese plate as it does hanging off a Hunters Belt.

    SPECIFICATIONS

    Overall Length: 20.5 cm
    Blade Length: 9.5 cm
    Blade Thickness: 5 mm
    Style:Traditional German Trouser Knife (JagdNicker)
    Steel: 440C
    Hardness:57-59 
    Handle Material: Deer Antler (Either Red or Sambar Deer)
    Weight: 245 Grams
    Made in: Germany
    Sheath: Custom Black Leather 

    The history of Boker can be traced back to the 17th century. In the 1800’s the German tool maker was producing swords and other blades for use in the various wars that were going on in Europe at the time. In the1860’s the company had split with part of the family emigrating and setting up factories in America. The German and American factories produced similar products.  Both used the “Tree Brand” logo. The “Tree Brand” logo represents the giant chestnut tree that was at the front of the original Boker factory in Remscheid, Germany in the 17th century.

     We also have an original 'Integral' Fixed blade with Cocobolo Handle available which can be seen in the last image and also at this link:

    https://www.sportingoutbacksupplies.com.au/boker-solingen-german-made-integral-fixed-blade-knife-with-cocobolo-wood-handle-and-custom-sheath#product-details-tab-specification

    • AUD$225.00
  • Stunning and rare Browning Hunting Heritage Series Limited Edition Rocky Mountain Elk Foundation knife in wooden Display Case #228 of 550

    Rare and 1 of only 550 made and this one is number 228.

    Made in Japan for Browning and extremely  good quality

    Overall length is approx 19.5cm when open and blade length is approx 8.5cm with a closed length of approx 11cm

    One side of mirror finish blade reads "ROCKY MOUNTAIN ELK FOUNDATION 2002 BANQUET EDITION" This is engraved in 22 carat gold.

    BROWNING 228 OF 550 and the other side reads "JAPAN"

    It has a beautifully figured Burlwood handle pinned with brass pins and it has a lanyard hole.

    Very rare Japanese Browning knife and made in 2002 so is now 20 year old.

    Please see detailed images which form part of the description.

    We have placed this in the Rare and Vintage catogary but it is in new condition and totally unused and unsharpened. Couple of little age marks on the wooden box and blade which can be seen in the images.

    A really nice collectable piece and 1 of only 550

    The handle is made of Burl, with a lanyard hole and the bolsters are made of Nickel Silver.

    Made in Japan.

    Comes with a solid hardwood display case with two removable feet and a scene of an Elk Stag with a small herd of Elk Hinds on the top with the BROWNING trade mark.

    Inside, it has a dark velvet display cut out for the knife and an emblem of the same scene as on the top of the case but in colour.

    This is a wonderful piece with a beautiful Browning Japanese made knife and a rare collectable in Australia.

    • AUD$0.00
  • NOW ON SPECIAL: This Browning combo knife has one folding lock knife and one fixed blade gut hook hunting knife; both with black wood handle. Comes with a strong cordura belth sheath; front pouch holds the folding knife and the rear pouch holds the gut-hook knife.

    • AUD$0.00
  • Browning Hunting Heritage Series Limited Edition Moose Display Box Model 29 Knife.

    Rare and 1 of only 3000 made.

    Made in Japan for Browning

    Overall length is approx 23cm and blade length is approx 11.5cm.

    One side of blade reads "BROWNING 1 of 3000" and the other side reads "MODEL 29 JAPAN"

    One side of the Burlwood handle is embossed with the scene of the World Trade Centre in New York and the words 'WORLD TRADE CENTRE 9.11 NEVER FORGET" in a small emblem.

    Very rare Japanese Browning knife and circa early 2000.

    Pleas see detailed images which form part of the description.

    We have placed this in the Rare and Vintage catogary but it is new and totally unused and unsharpened. Couple of little handling marks on the wooden box and blade which can be seen in the images.

    A really nice collectable piece and 1 of only 3000

    The handle is made of rosewood or walnut wood, with a lanyard hole.

    Made in Japan.

    Comes with a solid hardwood display case with a scene of two large Moose, the BROWNING trade mark and the words 'Hunting Heritage Series' Limited Edition Moose. and with Browning stamp.

    SOS#002750

    • AUD$0.00
  • Browning Model 22 Collectable Knife.

    1 of only 2000 made and getting increasingly harder to find in mint unused, unsharpened condition.

    Overall length is 9 1/4", and the blade length is 5".

    One side of the handle is embossed with the scene of two puppies looking at a rifle.

    The handle is made of either, Cocobollo, Rosewood or Walnut wood, with lanyard hole.

    Made in Japan. Comes with a solid brown sheath with Browning stamp and a nice Suede Knife roll with the Browning Label on the front and Browning metal head on the zipper pull.

    This is a superb, and unique Browning model 22 limited edition collectable hunting knife.

    With this being one of the finest models bearing the Browning name.

    This knife was commissioned by Browning to be a companion to the Browning Model 22 Firearm and is one of only 2000 made and very collectable.

    This is beautifully crafted, and handmade and the knife offers quality, craftsmanship, and performance and is a fine custom knife.

    Made by Seki in Japan and the very finest in Browning quality. This model was limited to 2,000 examples and was made around 1990 and they were expensive knives back then, usually priced in the $150-$200 USD range.

    Like Solingen in Germany or Sheffield in England,  Seki City has an 800+ year history of steel and blade making and is still home to a wealth of multi-generational, highly skilled craftsman. Seki is one of the world's foremost hotbeds of high-quality knifemaking and is currently producing some of the finest knives on the planet and one of Japan's most renowned makers is Ichiro Hattori who got his start in his father's shop and then went on to make knives for Kershaw, SOG, Browning, Beretta, and many other before opening his own custom shop. Hattori was the contractor for this model and this knife graphically illustrates why his knives are so sought after. His knives are almost constantly sold out and although customers can be placed on a waiting list, no time table is given. Hattori is now in his 70's and has always put quality and perfection before production. The knife has not been used, carried, or sharpened and remains in perfect condition.

    The knife comes in its original padded suede storage case. The knife is just beautifully crafted and is of exceptional quality. The way these knives were made is more like a fine custom than a standard production knife. The attention to detail is outstanding! The knives were hand made by highly skilled craftsman and feature the finest in quality and superb fit & finish. This is one of the larger models and it's also the only model I'm aware of that has a bead-blasted blade finish. The other knives are either mirror polished or have a bright satin finish. The thick blade was precisely ground and has a deep profile. The blade was aggressively ground and displays crisp, clean lines. Both sides of the blade were laser etched in a floral motif. The blade is very sharp and it will shave. The blade steel is likely AUS-8, although I've not been able to verify this. The blade has that certain premium-quality feel to it as well.

     The guard was shaped from thick nickel silver and was beautifully executed and the handle is a hard wood of we believe either Cocobollo, Rosewood or Walnut.

    *Couple of little storage/age marks on the Leather sheath.

    A must for your collection and especially if you love Browning.

    Only one of these available.

    • AUD$395.00
  • Buck Hunting 2 knife and 1 Saw Combo Value Pack
    • 23% less

    Buck hunting combo value pack comes with three knives from Buck.

    Both these Buck Knives are made in the USA. Saw is made for Buck in Taiwan

    Edge2x technology.
    MiniBuck is 4 7/8" overall length when opened and less than 3" when closed, with 1 7/8" drop-point 420HC stainless steel blade. Blade locks open for safety. High-tech thermoplastic handle.


    Buck caping knife is 7 1/8" overall with 3 1/2" 420HC stainless steel blade with small field dressing hook. Contoured thermoplastic rubber handle for sure grip.


    Buck folding saw lock knife is 14 1/2" overall with 6 1/4" blade with coarse off-set teeth saw that is removable for easy cleaning. The 8 1/2" ergonomic handle is made of ABS high impact plastic. Effective lightweight saw that folds to compact size for convenience.

     

    ***Please note, this is a collectors pack and the plastic packaging was damaged with the card backing remaining, hence us putting it as a Special discounted price.*****

    • AUD$135.00
  • *Please read full description and see detailed images which form part of the description.

    This is a really nice 30 year old mint Buck 1993 Model 692 Vanguard Knife with European Oak or Red Wood Laminated Handle, original Tan Brown Sheath and Original Box

    Fully made in the USA which is also stamped on the blade.

    Overall length is 8 1/2", with 4 1/8" stainless steel blade.

    Full tang blade with a nice factory sharp edge.

    Stamped on the blade is BUCK 692 /  USA (The '/' mark means it was produced in 1993

    Really nice lacquered Laminated European oak or Red Wood coloured wood handle with brass finger guard and brass pommel with black spacers.

    Comes with Buck's brown leather 191 belt sheath with Closure Stud.

    Made in the Buck factory 30 years ago in the USA and quite hard to find and in mint unused condition.

    A really good optimal sized all-round hunting knife and will serve you for years and a nice collectable older Buck knife.

    *Box and sheath have a few age marks as can be seen in the images and the stud may have seen a slight repair.

    SOS#002990 

    • AUD$0.00
  • BUCK Custom Shop Limited Edition Frontiersman with Special Bone and Wood Handle.
    Stock 0124SISSP4.

    *Please read full description and see detailed images that form part of the description.

    This is a beautiful Custom Shop Buck 124 Frontiersman 'Klink' Special with Factory sheath and Box, new, unused, and has never been carried.

    Made to Harold Klinkhamer's (designer of this Knife) specifications.

    Harold Klinkhamer, owner Klinkhamer Knife Works, Delphi, Indiana designed some very special knives for Buck USA

    This 124 Klink Special is stamped BUCK 124 U.S.A. With the Idaho state symbol

    The natural handle material (which is natural and all are different) Is made from polished Deer Antler and Iron Wood and what may seem like any blemishes are a natural part of the Antler and wood.

    This is a beautiful one of a kind Knife as they all are a little different because of the natural handle materials that are used.

    In an email from Harold Klinkhamer of April 2008 he stated: "I am the designer of this particular Knife and I will give you some details, your buyer may be interested in. This is called the KLINK SPECIAL 122/124 NEMO. There were 67 of them made with serial #'s. Those who bought this second Series were allowed to buy extras. Therefore there are 22 that did not have serial #'s on them of which this is one of them".

    So in Total there are only 89 of these beautiful knives made for Buck USA and it is very rare and collectable especially here in Australia.

    12" Overall.

    6 3/4" 420HC Stainless Steel Clip Blade.

    Full Tang Construction With Black Micarta Handle Slabs. Polished Aluminum Hand Guard and Pommel.
    Mint in the Std yellow BUCK USA box, with beautiful black leather sheath stamped 124 on the reverse of the sheath.
    Limited edition and Made in the USA. (box has been slightly creased due to freight from USA)
    Only 1 of these available.
    No longer made by BUCK and getting rarer and now hard to find.

    Special Edition. Made in USA. Excellent for big game, camping or as a rare BUCK collectable.

    • AUD$749.00
  • Vintage and collectable Buck OCEANMATE 0127-BK-0 (Catalog 2117) Beautiful Filleting Knife complete with light brown leather sheath and original Buck Box. VERY COLLECTABLE.

    Overall length is 35cm with 22cm Blade and 12cm Handle.

    Stamped on the Blade is  BUCK 127 USA and stamped on the handle and sheath is the BUCK Stamp

    Black thermoplastic rubberised grip.

    Excellent USA made Filleting Knife

    Easy to keep clean. Holds a good edge.

    Comes with Tan Brown Leather Belt Sheath with with plastic insert.

    In almost mint condition. (Couple of small age/storage marks on the sheath that can be seen in the final detailed image).

    Also comes in its original older Buck Box.

    Made in USA.

    Our Buck Knives are made in the USA and some are older discontinued models that are very collectable. 

     

     

    • AUD$189.00
  • Rare Buck 103 Ducks Unlimited Commemorative Knife in Black Presentation Box.

    Overall length is 8 1/4", with a 4" extra wide upswept blade with Aluminium guard and pommel. The tip is narrow, while the curved belly aids in getting through thick layers. Full tang construction.  Laminated birchwood handle with cherry finish.

    It has a Duck scene on the blade and stamped Ducks Unlimited on the Grey Laminate handle

    Comes in a nice Black leatherette Display Box and paperwork ( Displayed in box but no sheath)

    Few little storage marks etc in the mould where the knife sits.

    Made in the USA. Circa 2010

    Now rare and collectable. 

    • AUD$329.00
  • Buck Knife: Buck 103 Skinner Knife
    • 14% less

    Buck Fixed Blade Skinning and all-purpose knife.

    Model B103.

    Overall length is 8" with a 4" 420HC steel extra wide upswept blade.

    Rockwell hardness: 58.

    Black Phenolic handle and silver-finished pommel and guard.

    Comes with hand-stitched black leather belt sheath and box.

    This one was made in 2013

    Made in USA.

    • AUD$249.00
  • Rare Buck 103 Hunting Heritage Collection 'Life Member' North American Hunting Club Commemorative Buck Fixed Blade Skinning and all-purpose knife. 

    This knife is one of a collection of eight world-class knives in the NAHC (North American Hunting Club) Hunting Heritage Knife Collection. Comes with Certificate of Authenticity and Care Instructions.

    Overall length is 8 1/4", with a 4" extra wide upswept blade with brass guard and pommel. The tip is narrow, while the curved belly aids in getting through thick layers. Full tang construction.  Laminated birchwood handle with cherry finish.

    Comes with Ox Brown saddle hand-stitched leather belt sheath.

    Made in the USA. Circa 2002-3

    Now rare and collectable.

    We also have in stock the Bear & Son Guthook Hunter which is another knife in the NAHC Hunting Heritage Knife Collection. Here's the link.

     

    • AUD$289.00
  • Buck Knife: Buck 105 Pathfinder Bowie Knife
    • 13% less

    Buck Pathfinder Bowie Bladed Hunting Knife.

    Model Buck 105.

    Overall length is 9" with a 5" clip bowie 420HC blade.

    Black Phenolic plastic handle and a polished aluminum butt and finger guard.

    Comes with hand-stitched black leather belt-looped sheath and box.

    Date range of knives is between 2006-2013

    Made in USA.

    *** Brand New but box may have some light storage marks.*** 

    • AUD$199.00
  • Buck Knife: Buck 120 General Cocobolo Dymondwood Handle
    • 5% less

    Buck General Model 120, Big Hunting Knife.
    This is the bigger version of the most popular fixed blade knife, the Buck 119 Special.

    Buck General 120 knife with Cocobolo Dymondwood handle. The Buck General has a long blade enhances the exquisite appearance, while creating a hunting knife that makes de-boning a lot simpler. 

    Overall length is approximately 12" with a 7 3/8" 420HC steel clip blade with a blood groove. Rockwell hardness: 58. Brown Cocobolo Dymondwood handles with brass guard and pommel.

    420HC steel is Buck's standard blade material because it approaches the wear resistance of high carbon alloys while delivering the corrosion resistance of chromium stainless steels. Add Buck's heat-treat process and you have a very user-friendly combination of superior corrosion resistance with excellent strength for wear resistance and durability. You also have a blade that is easy to resharpen.

    The clip blade with the crescent tip makes the blade thinner with a sharper point. This shape provides good control for detail work and cutting in tight places. It is also well suited for intentional punctures like new holes in your belt, etc. While the point of the blade is effective for detail work, it is not as strong as the thicker points on drop points and skinners. 

    Comes with hand-stitched leather belt-looped sheath in Burgundy/Dark Ox Blood Colour.

    The Exclusive, elite, and luxurious, the General remains an exceptional choice for a hunting knife or simply as a collectible.

    Made in the USA.

    Our Buck Knives are generally made in the USA and some are older discontinued models that are very collectable. Sometimes the boxes show storage marks but all knives are brand new.

     We also have the Black Handled model 120 General as seen in the last image and available at this link:

    https://www.sportingoutbacksupplies.com.au/buck-knife-buck-120-general-hunting-knife.html

     

     

    • AUD$359.00
  • Buck Knife: Buck 120 General Hunting Knife
    • 14% less

    Buck General Model 120, Big Hunting Knife.
    This is the bigger version of the most popular fixed blade knife, the Buck 119 Special.

    The Buck 120 offers traditional elegance in an all-purpose bigger knife.

    Overall length is 11 3/4" with a 7 1/4" 420HC steel blade with a blood groove.

    Rockwell hardness: 58.

    Black Phenolic handle and silver-finished pommel and guard.

    Comes with hand-stitched black leather belt-looped sheath.
    Made in USA.

    Our Buck Knives are generally made in the USA and some are older discontinued models that are very collectable.

    Sometimes the boxes show storage marks but all knives are brand new.

    We also have the Buck 120 General in Cocobolo Dymondwood which can be seen in the last image and is available at the link below:

    https://www.sportingoutbacksupplies.com.au/buck-knife-buck-120-general-cocobolo-dymondwood.html?category_id=260

     

     

    • AUD$299.00
  • BUCK Limited Edition Frontiersman. Stock #B-124BKSLE. 12" Overall. 6 3/4" 420HC Stainless Steel Clip Blade. Full Tang Construction With Black Micarta Handle Slabs. Polished Aluminum Hand Guard and Pommel. New in the black limited edition box with beautiful black leather sheath.
    Limited edition and Made in the USA.
    Only 1 available.

    • AUD$0.00
  • BUCK Limited Edition Frontiersman.
    Stock 0124BKSLE. 12" Overall. 6 3/4" 420HC Stainless Steel Clip Blade. Full Tang Construction With Black Micarta Handle Slabs. Polished Aluminum Hand Guard and Pommel.
    New in the Std yellow BUCK USA box, with beautiful black leather sheath stamped 124 on the reverse of the sheath.
    Limited edition and Made in the USA. (box has been slightly creased due to freight from USA)
    Only 1 of these available.
    No longer made by BUCK and getting rarer and now hard to find.

    Special Edition. Made in USA. Excellent for big game, camping or as a collectable.

    SOS# 00249

    • AUD$0.00
  • Buck Knife: Buck 141 Large Paklite Skinner in Black
    • 21% less

    Buck Large Paklite Skinner.

    One piece 420HC stainless construction with black traction coating.

    Overall length is 8" overall, with 3 1/2" skinner blade.

    Skeletonized handle.

    An unusual knife.

    The knife itself weighs only approximately 115 g.

    Comes with black heavy-duty nylon belt sheath.

    Made in USA.

    Excellent USA made Skinner, lightweight and ideal for your Back Pack

    These were made in the USA 2012/14.

     

    • AUD$125.00
  • Buck Knife: Buck 141 Large Paklite Skinner in Blaze Orange
    • 21% less

    Buck Large Paklite Skinner in Blaze Orange.

    One piece 420HC stainless construction with orange traction coating.

    Overall length is 8" overall, with 3 1/2" skinner blade.

    Skeletonized handle.

    An unusual knife. The knife itself weighs only approximately 115 g.

    Comes with black heavy-duty nylon belt sheath.

    Made in USA.

    Excellent USA made Skinner, lightweight and ideal for your Back Pack

    These were made in the USA 2013.

    • AUD$125.00
  • Buck Custom Made 192 Virginia Game Warden Vanguard knife.

    Made in the USA and in absolute mint condition in original box with paperwork.

    'Virginia Game Warden 1996 15th Edition 1 of 350' stamped on one side of the blade along with the number 333 and BUCK 192 USA

    This is number 333.

    Overall length is 8 1/2", with 4 1/8" stainless steel blade.
    Full tang.

    Laminate wood handle with brass finger guard and brass pommel.
    Virginia Game Warden Motif and wording on side of handle and also on the sheath.
    Limited edition 1996 knife from the Buck Custom Shop.

    Comes with Buck's brown leather belt sheath, box and paperwork.  

    Made in the USA

    SOS Code: 00285

    • AUD$0.00
  • This is a custom made knife by BUCK as a 1993 Duck Unlimited commemorative 192 model knife. It has a laser-etched picture of a pair of mallard drake and duck on the blade. The overall length is 8 1/2", with a 4" 420HC Stainless Steel blade and cocobolo handle. Made in the USA. Comes in a brown tanned leather hand-stitched custom sheath.

    • AUD$325.00
  • Buck Knife: Buck 196 Mini Alpha Hunter Camo Handle
    • 14% less

    Buck Mini Alpha Hunter with Camo Handle.

    Overall length is 6 3/8", with 2 1/2" mirror polished 420HC stainless drop point blade.

    Full tang.

    With hard Plastic Camo finish Handle.

    Comes with Camo finish Nylon belt sheath.

    Made in 2007 in the USA and now very collectable

    We also have a Cocobolo Wood Handled version which can be seen in the final image and at this link:

    https://www.sportingoutbacksupplies.com.au/buck-knife-buck-196-mini-alpha-hunter-cocobolo-handle#product-details-tab-specification

    • AUD$245.00
  • Buck Knife: Buck 196 Mini Alpha Hunter Cocobolo Handle
    • 8% less

    2004-7 Circa Buck Mini Alpha Hunter with Cocobolo Hard Wood Handle.

    *Please read full description and see detailed images.

    Almost mint unused and unsharpened condition with just a few minor age marks as can be seen in the detailed images.

    Overall length is 6 3/8", with 2 1/2" mirror polished ATS-34 High Tech stainless steel and a drop point blade.

    Full tang.

    With Cocobolo Hard Wood Handle.

    Comes with Ox Blood Red Leather Belt Sheath and original Box.

    Made in 2004-7 in the USA and no longer produced and now very collectable.

    We also have a Camo version which can be seen in the final image and at this link:

    https://www.sportingoutbacksupplies.com.au/buck-knife-buck-196-mini-alpha-hunter-camo-handle.html

     

    • AUD$265.00
  • Buck Knife: Buck 1995 Mentor Fixed Blade Knife with Black Rubberised Handle & Black Sheath
    • 22% less

    Buck 1995 MODEL 470 Mentor Fixed Blade knife.

    Please see detailed images that form part of the description.

    Its overall length is 25.5cm (10") with a 13.5cm (5 1/4") stainless brushed steel coated blade.

    It has Black thermoplastic rubber handle with Buck logo Emblem.

    Full tang construction.

    Comes with Black hard molded plastic belt sheath. Made in USA.

    No Box with this model.

    ***Please note that this is a 1995 model and is now out of production with Buck and these are now quite A collectable knife and is around the 26 year old mark.

    The knife is new and in excellent condition and has not been sharpened or used.

    There are a couple of age marks on the blade where it has been in and out of the sheath which can be seen in the detailed images.

    ***This is the knife I have carried now out in the hunting field for over 28 years. Mine is still going strong and I even bought another as I love it so much. It is the perfect shape and size for hunting

    We also have a Camo version, a Ducks Unlimited Black model and a Buck Custom Shop model Mentor which can be seen on our website at the link below and in the final image.

    https://www.sportingoutbacksupplies.com.au/buck-knife-ducks-unlimited-2000-special-edition-mentor-knife#product-details-tab-specification

     

    • AUD$175.00
  • Older and collectable 1995 Buck 102 Woodsman fixed blade knife with Black Phenolic Handle, Black Leather Sheath. (No Box)

    *Please read full details and see detailed images which form part of the description.

    This is a nice mint example of a 1995 Buck USA Made 102 Woodsman model.

    It has the 'C' mark on the blade which from the Buck dating chart is 1995 and it has a lovely Black leather sheath with the word 'BUCK' stamped diagonally where the new model Bucks are stamped horizontally.

    Mint condition, unused and unsharpened and nearly 29 years old. A nice knife for the BUCK collector. 

    Blade length is 4", and overall length is 7 6/8".

    Comes with a black leather sheath

    Nice little Hunting knife.

    Made in the U.S.A.

    We also have available current models which can be seen in the final image and also at this link:

    https://www.sportingoutbacksupplies.com.au/buck-knife-buck-woodsman-102.html#product-details-tab-specification

     

    • AUD$245.00
  • This is a nice older collectable Buck 1997 Model 692 Vanguard Knife with original Nylon Sheath.

    This one has the more collectable sheath with the BUCK logo sewn diagonally (newer models have the BUCK logo sewn horizontally)

    Mint, unused condition.

    Fully made in the USA which is also stamped on the blade along with 692 USA and the 1997 Buck manufacturing stamp.

    Overall length is 8 1/2", with 4 1/8" stainless steel blade.

    Full tang blade with a nice factory sharp edge.

    Nice solid rubberised anti-slip handle with brass finger guard and brass pommel.

    Comes with Buck's Black Nylon 191/192 belt sheath with Closure Stud.

    Made in the Buck factory 27 years ago in the USA and quite hard to find in this condition.

    No box with this knife.

    A really good optimal sized all-round hunting knife and will serve you for years.

    • AUD$245.00
  • Older 2004 manufacture 19 year old and original Buck Special Model 119 Hunting Knife.

    *Please read full description and see detailed images.

    This is Bucks most popular fixed blade knife, the Buck 119 Special.

    Buck 119 Special Hunting Knives Fixed Blade Knife Genuine Black Leather Sheath and original box.

    Made in 2004 and 19 years old brand new unused knife

    This classic large hunting knife has been a super seller going back some 47 years. Hoyt and Al Buck used to build them by hand in their two-man shop. Today, this larger hunting knife with a large clip blade for detail work, piercing and cutting in tight places for added control, is as popular as ever.
    Specifications

     Blade Length: 6″ (15.2 cm)
     Blade Material: Satin Finish 420HC Stainless Steel
     Carry System: Black leather sheath
     Handle Material: Phenolic
     Quantity: Yes
     Weight: 7.5 oz. (213.5 g)
     Made in USA

    Rockwell hardness: 58.

    Black Phenolic handle and silver-finished pommel and guard.

    Comes with hand-stitched black leather belt-looped sheath.
    Made in USA.

    Our Buck Knives are generally made in the USA and some are older discontinued models that are very collectable.

    **This knife was made in 2004 but the knife is still brand new and unused.

    Please note it has the slightly older Yellow and Black Buck Box shown in the first 2 images and not the newer box shown in the other images. The knife is exactly the same.

     

     

    • AUD$249.00
  • Buck Knife: Buck 2004 Model 119 Special Hunting Knife with Leather Sheath
    • 13% less

    Buck Special Model 119 Hunting Knife.
    This is Bucks most popular fixed blade knife, the Buck 119 Special.

    Buck 119 Special Hunting Knives Fixed Blade Knife Genuine Black Leather Sheath

    Please Note: Made in 2004 and 20 years old brand new knife in original sheath

    This classic large hunting knife has been a super seller going back some 47 years. Hoyt and Al Buck used to build them by hand in their two-man shop. Today, this larger hunting knife with a large clip blade for detail work, piercing and cutting in tight places for added control, is as popular as ever.
    Specifications

     Blade Length: 6″ (15.2 cm)
     Blade Material: Satin Finish 420HC Stainless Steel
     Carry System: Black leather sheath
     Handle Material: Phenolic
     Quantity: Yes
     Weight: 7.5 oz. (213.5 g)
     Made in USA

    Rockwell hardness: 58.

    Black Phenolic handle and silver-finished pommel and guard.

    Comes with hand-stitched black leather belt-looped sheath.
    Made in USA.

    Our Buck Knives are generally made in the USA and some are older discontinued models that are very collectable.

    *This knife was made in *2004 is brand new and unused and unsharpened with its factory edge.

    (No Box)

    *(See date chart for details)

     

     

     

     

    • AUD$199.00
  • This is a nice older Buck 2005 Model 692 Vanguard Knife with original Nylon Sheath.

    Mint, unused condition.

    Fully made in the USA which is also stamped on the blade along with 692 USA and the 2005 Buck manufacturing stamp.

    Overall length is 8 1/2", with 4 1/8" stainless steel blade.

    Full tang blade with a nice factory sharp edge.

    Nice solid rubberised anti-slip handle with brass finger guard and brass pommel.

    Comes with Buck's Black Nylon 191/192 belt sheath with Closure Stud.

    Made in the Buck factory 18 years ago in the USA and quite hard to find in this condition.

    No box with this knife.

    A really good optimal sized all-round hunting knife and will serve you for years.

    SOS#002250

    • AUD$0.00
  • Older and collectable 2005 Buck 102 Woodsman fixed blade knife with Black Phenolic Handle, Black Leather Sheath. (No Box)

    *Please read full details and see detailed images which form part of the description.

    This is a nice almost mint example of a 2005 Buck USA Made 102 Woodsman model.

    It has the Anvil mark on the blade which from the Buck dating chart is 2005 and it has a lovely Black leather sheath with the word 'BUCK' stamped horizontally.

    Almost mint condition, unused and unsharpened and nearly 19 years old. A nice knife for the BUCK collector. (Few very minor storage marks here and there) 

    Blade length is 4", and overall length is 7 6/8".

    Comes with a black leather sheath

    Nice little Hunting knife.

    Made in the U.S.A.

    We also have available current models which can be seen in the final image and also at this link:

    https://www.sportingoutbacksupplies.com.au/buck-knife-buck-woodsman-102.html#product-details-tab-specification

     

    • AUD$235.00
  • Buck Knife: Buck 2006 Model 119 Special Hunting Knife with Leather Sheath
    • 15% less

    Buck Special Model 119 Hunting Knife.
    This is Bucks most popular fixed blade knife, the Buck 119 Special.

    Buck 119 Special Hunting Knives Fixed Blade Knife Genuine Black Leather Sheath.

    Please Note: Made in 2006 and 17 years old brand new knife in original sheath

    Has a couple of minor storage marks on the Pommel and sheath which is reflected in the discounted price.

    This classic large hunting knife has been a super seller going back some 47 years. Hoyt and Al Buck used to build them by hand in their two-man shop. Today, this larger hunting knife with a large clip blade for detail work, piercing and cutting in tight places for added control, is as popular as ever.
    Specifications

     Blade Length: 6″ (15.2 cm)
     Blade Material: Satin Finish 420HC Stainless Steel
     Carry System: Black leather sheath
     Handle Material: Phenolic
     Quantity: Yes
     Weight: 7.5 oz. (213.5 g)
     Made in USA

    Rockwell hardness: 58.

    Black Phenolic handle and silver-finished pommel and guard.

    Comes with hand-stitched black leather belt-looped sheath.
    Made in USA.

    Our Buck Knives are generally made in the USA and some are older discontinued models that are very collectable.

    *This knife was made in *2006 and has a few age marks on the sheath but the knife is brand new and unused and unsharpened with its factory edge.

    *(See date chart for details)

     

     

     

     

    • AUD$195.00
Items: 160 of 977, per page
Bestsellers