Collectable Knives
Please note that Sporting Outback Supplies have a strict policy only to sell knives to persons over the age of 18 years, and that by ordering and purchasing knives from Sporting Outback Supplies you warrant that you are over the age of 18 years and agree that you understand the rules and regulations in relation to knives in your own state or territory.
-
New Old Stock absolute Mint and unused condition.
*Please read full description and see detailed images AS WE AWAIT CLARIFICATION FROM BUSSE on this knife.
*Based on the larger sized BUSSE Knife we have recently sold, we believe this is an original hard to find BUSSE USA Custom made Tactical Fixed Blade Knife.
*To the best of our knowledge, We think this could be 'Badger Attack' model but are not 100% sure as they have quite a few custom models, but unlike the larger knife, this one does not have the usual BUSSE Stamp on the blade but does follow the same pattern, style, weight, shape and handle fittings so are sure based on the rest of the collection which were all originals, that it is also original but cannot say 100%.
About BUSSE.
Hand made in the USA.
The World leader in extreme performance knives. Most powerful knives that have been unchallenged for more than 30 years. Cutting more than 2,770 pieces of 1” hemp rope without resharpening. Bending more than 35 degrees and coming back true without damage. Best rated warranty in the industry
These knives do not ordinarily come with a sheath but we have managed to fit one which is a reasonable fit which is a SORD brand tactical MOLLE compatible sheath
These knives are amazing and virtually indestructable.
The BUSSE Blade:
INFI is a proprietary steel and heat-treat protocol developed by Busse Combat Knife Co. and is ONLY available through Busse Combat.
Busse Combat knives are often featured in movies and on television shows and series. Whether the studio requests a custom designed blade for a specific character and purpose, or they simply use standard Busse knife models, it’s always fun to watch our favorite actors wielding a Busse knife.
Screen Credits:
The Avenger's Hawkeye fighting with his custom Hawkeye Dagger, The Walking Dead's Daryl Dixon fighting off zombies, or Grown Up 2's David Spade and his buddies sampling Busse knives in a store, Jack Reacher, NCIS, Underworld, Dual Survival, CSI, Justified, Man V's Wild, Revolution and Homefront are naming just a few of the movies and screen shows that thse BUSSE knives have made an appearance in.
Model
Blade Steel: N690Co stainless steel
Hardness: HRC 58-60
Blade Coating: Muddy Brown Coating
Handle: Tan/Brown Canvas Micarta
Blade Length: 15cm - 11.5"
Overall Length: 29.5 cm - 11.5"
Blade Thickness: Approx 0.5cm 1/4"
Weight:New and unused and has been in storage for some years and absolute mint condition
We also have a Giant BUSSE model which we believe is a 'Battle Mistress' but again are not 100% certain which can be seen in the final image and at this link:
https://www.sportingoutbacksupplies.com.au/busse-usa-custom-made-giant-fixed-blade-knife
SOS#005650
-
This is a beautiful little pocket folding lock knife to commemorate the 200th Year anauguration of Geroge Washington "Father of his Country" and comes with original paperwork and velvet gift box.
A real rarity and made in 1989 for the SEARS Group.
Closed the knife is 9cm long. Blade length is 7cm and open the knife is 16cm.
Stamped on the blade is SEARS CRAFTSMAN USA 95114.
George Washington's signature is etched in to the blade along with APRIL 30 1789 (Anauguration date)
It has Nickel Silver Bolsters and a Cherry Tone wooden handle with a Pewter medallion of George Washington in his most noted pose of Cammander in Chief of Colonial Armies in the American Revolution
Comes in original grey velvet and metal presentation gift box with original paperwork.
it is A lovely, collectable gift box knife and would make a great present or gift.
Only One available and quite rare.
Fully made in the USA.
-
-
11% less
This is the legendary Quality Knife made in Spain by AITOR
Aitor COMMANDO Tactical Survival Knife with Black Scabbard.
*Please read full description and see detailed images which form part of the description.
Stamped on blade is Aitor Commando A-163287.
The knife is a really good quality heavy weight knife and is in almost mint unused condition with just a few small marks on the Scabbard where it has been on display and in and out of the scabbard.
The legendary Aitor Commando survival knife originally designed together with the German manufacturer Mauser for the German army. Powerful ultra resistant knife for multiple extreme survival situations.With a 175mm blade and overall length of 310mm, this heavy duty miltiary/survival knife boasts a grippy ergonomic handle cast in robust magnesium-aluminium , powder coated with black epoxi and heat treated to 58Rc.The handle has a hollow capacity and comes complete with the standard Aitor survival kit enclosed by the heavy-duty screwed buttcap.The 17.5-cm blade ground from 5-mm Cr Mo Va stainless bladesteel has a powdercoated satin-grey finish with a spear point, slight Spanish-style (shallow) reverse curve and a saw-back.
Hardness 55/58 HRC
The handle of the knife includes a small survival kit with Compass.
The Scabbard also has a secret compartment which has slots for 4 x 5.56mm - 7.62mm NATO Rifle Cartridges (not included)
One piece stainless construction with solid textured handle.
Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.
We also have an AITOR MAGNUM BOWIE which can be seen in the final image and also at this link:
-
-
-
5% less
This is the legendary Jungle King I knife from the Aitor Jungle King knife series.
Quality Knife made in Spain
Black Tactical Version with Dark Green Scabbard.
Considered by many experts as the best survival knife in the world, pioneering and unique, being one of the best in its category. Its design, versatility and functionality make it capable of adapting to any environment of extreme survival.
Blade Length: 205mm
Overall: 360mm
Sheet thickness: 5mm
Weight 1156 grams
Double saw.
Handle and pommel: Hollow pearl
Hardness 55/58 HRC
Includes quality heavy duty polymer scabbard with built in Sling Shot Prongs.
The holster and handle Include some of the following survival accessories:
-Fishing kit
-Sewing kit
-Scalpel
-Dressings
-Tweezers
-Compass
-SOS Mirror signals
-Latex tube (slingshot)
-Skinner multipurpose knife
-Parra Cord
14 1/4" overall.
8" black powder coated stainless clip point blade with double cut sawback.
Black finish knurled stainless handle.
Black finish stainless guard with lashing holes.
Stainless pommel unscrews to reveal a compass inside cap and small survival kit stored in clear acrylic tube in handle.
O-ring sealed.
OD green hard nylon belt sheath with leg ties.
Sheath also stores a 7" overall skinner with 2 1/2" guthook blade.
One piece stainless construction.
Skinner features thumb ridge, ridged handle slot, lashing holes, flathead screwdriver end with bottle/can opener,
OD green nylon lanyard.
Also stored inside sheath is a pullout tray with latex powerbands for slingshot, empty vial and sharpening stone.
Back of tray features ruler, S.O.S. signals and signaling mirror.
Outside of sheath features several feet of OD green nylon cord and black coated stainless metal arms at tip of sheath that flip out to serve as slingshot.
Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.
We also have one of these in Silver which can be seen in the final image and also at this link:
-
-
-
5% less
This is the legendary Jungle King I knife from the Aitor Jungle King knife series.
Quality Knife made in Spain.
*A few small storage marks on blade as can be seen in the detaile images.
Silver Version with Dark Green Scabbard.
Considered by many experts as the best survival knife in the world, pioneering and unique, being one of the best in its category. Its design, versatility and functionality make it capable of adapting to any environment of extreme survival.
Blade Length: 205mm
Overall: 360mm
Sheet thickness: 5mm
Weight 1156 grams
Double saw.
Handle and pommel: Hollow pearl
Hardness 55/58 HRC
Includes quality heavy duty polymer scabbard with built in Sling Shot Prongs.
The holster and handle Include some of the following survival accessories:
-Fishing kit
-Sewing kit
-Scalpel
-Dressings
-Tweezers
-Compass
-SOS Mirror signals
-Latex tube (slingshot)
-Skinner multipurpose knife
-Parra Cord
14 1/4" overall.
8" black powder coated stainless clip point blade with double cut sawback.
Silver finish knurled stainless handle.
Silver finish stainless guard with lashing holes.
Stainless pommel unscrews to reveal a compass inside cap and small survival kit stored in clear acrylic tube in handle.
O-ring sealed.
OD green hard nylon belt sheath with leg ties.
Sheath also stores a 7" overall skinner with 2 1/2" guthook blade.
One piece stainless construction.
Skinner features thumb ridge, ridged handle slot, lashing holes, flathead screwdriver end with bottle/can opener,
OD green nylon lanyard.
Also stored inside sheath is a pullout tray with latex powerbands for slingshot, empty vial and sharpening stone.
Back of tray features ruler, S.O.S. signals and signaling mirror.
Outside of sheath features several feet of OD green nylon cord and black coated stainless metal arms at tip of sheath that flip out to serve as slingshot.
Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.
We also have one of these in Tactical Black which can be seen in the final image and also at this link:
-
-
-
11% less
AITOR Hatcheta made in Spain Hatchet/Axe
*Please read full description and see detailed images which form part of the description.
In unused almost mint condition and holding its original unsharpened edge.
Nicely made with a Red Deer Stag motif etched in to the blade and a Rosewood Laminated Handle which is glued and pinned with 3 Brass Pins.
INOX -High Carbon Stainless Steel 440-c Jungle Hatchet with a Precision Hollow-ground Blade.
This Factory Mint Hatchet Is High Quality and has a Hollow-ground Blade made of INOX Chromium Molibdenum Vanadium Stainless Steel which is heat treated to a final Rockwell Hardness/HRC of 55/58.
Handle is hand fitted Red " Stamina Wood ".Laminated Handle with Lanyard Hole
This Hatchet has a Quality Brown Spanish Leather Sheath.
This Hatchet Has an Engraved & Etched Aitor Logo With an Image of a 12 Point Red Deer Stags Head Depicted On The Blade Of The Axe!
*Please note that there are a few storage marks on the leather cover which can be seen in the detailed images
Full Length approx: 33cm
Blade Length approx: 18cm
Handle Length approx: 14cm
Axe cutting Edge approx: 14cm
Spine Thickness approx: 5cm
Weight approx: 700grams
Blade Hardness 55/58 HRC
*Comes with its original leather belt cover which is hand made stitched and studded for extra strength.
A really nice Spanish made Hatchet
Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.
We also have a Puma German Hatchet and an Australian made 'DEWEY' Hatchet with Stag Antler Handle which can be seen in the final image and also at this link:
https://www.sportingoutbacksupplies.com.au/dewey-australian-made-hatchet
-
-
-
15% less
This is the legendary Quality Knife made in Spain
Big Magnum Bowie Tactical Version with Dark Green Scabbard.
Considered by many experts as the best survival knife in the world, pioneering and unique, being one of the best in its category. Its design, versatility and functionality make it capable of adapting to any environment of extreme survival.
12 1/4" overall Length.
7 1/4" stainless bowie style blade with fileworked spine.
Round palm-filling textured OD green polymer handle.
Black powder coated cross guard and pommel.
Lanyard hole. OD green hard nylon belt sheath with leg ties.
Handle and pommel: Solid Olive Green Polymer and Alluminium Pommel
Hardness 55/58 HRC
Includes quality heavy duty polymer scabbard
One piece stainless construction.
Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.
We also have a Silver Aitor Jungle King I which can be seen in the final image and also at this link:
-
-
-
12% less
This is the legendary Quality Knife made in Spain by AITOR
Aitor OSO NEGRO Bowie Tactical Version with Dark Green Scabbard.
AITOR OSO NEGRO
*Please read full description and see detailed images which form part of the description.
Stamped on blade is Aitor OSO NEGRO A-164382.
The knife is a really good quality heavy weight knife and is in almost mint unused condition with just a few marks on the blade where it has been on display and in and out of the scabbard.
The legendary Black Bear knife from the Bear range of knives. Considered by many experts as the best in the world for its configuration, balance, handling and sharpening with a hardness of 55/58 HRC. Its robust blade, with a polyamide handle, brass fender and pommel. Used by the COE Special Operations Company.
Blade (black chrome): 185mm
Total Length: 310mm
Thickness: 5mm
Double saw Back.
Hardness 55/58 HRC
Round palm-filling textured Black polymer handle.
Black powder coated cross guard and pommel.
Lanyard hole. OD green hard nylon belt sheath with leg ties.
Includes quality heavy duty polymer scabbard
One piece stainless construction.
Since 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.
We also have an AITOR MAGNUM BOWIE which can be seen in the final image and also at this link:
-
-
-
13% less
This is the legendary Quality Knife made in Spain by AITOR and no longer available.
Aitor ZAPADOR Jungle Knife with Black Polymer Scabbard.
*Please read full description and see detailed images which form part of the description.
Stamped on blade is Aitor ZAPADOR B-029102
The knife is a really good quality heavy weight knife and is in almost mint unused condition with just a few small marks on the Scabbard where it has been on display and in and out of the scabbard.
Bolo style Jungle Blade with full tang construction, solid guard and pinned with two alloy pins.
Blade = 145 mm
Handle = 105 mm
Overall Length (inc. Black sheath) = 300 mm
Weight (knife) = 339 g
Weight (with sheath) = 447 g
Includes heavy duty Polymer Sheath with leg ties
Made in SpainSince 1939 Aitor has been using modern materials and manufacturing methods to produce quality fixed blade and folding knives in their factory in Ermua Spain. Aitor products are exported worldwide, Aitor is very proud to be supplying several international armies.
We also have an AITOR MAGNUM BOWIE which can be seen in the final image and also at this link:
-
-
Please read full description.
This is a real beauty and we believe is a reproduction due to its almost mint condition but we cannot be sure as it came from a collection in the USA but has no markings so we are unsure of its origins apart from to say it is a real beauty and an unusual knife.This is a hand made knife with scabbard and we believe is either German or made in Sheffield England and looks like something from the mid 1800's or something you would see in the American Civil War ?
Its almost new condition does however suggest a reproduction of a period knife.
It is 32cm overall so is a big knife and has a double edged very sharp blade.
The blade is approx 20.5cm long and the Coffin Handle is approx 11.5cm
Heavy and well built it has a coffin shaped handle which is made from Black Buffalo Horn and pinned with 3 Brass Pins.
Full tang construction with a silver cross guard and a leather and metal scabbard with hand stitching on reverse.
It is the only one of these knives and design that we have ever seen. It has been well kept with just a few age marks on the sheath and blade and a couple of minor dings in the Buffalo Handle which can be seen in the images.
(one mark near centre brass pin on handle which would polish out)
We have described this knife to the best of our abilities with the information we have and the images form part of the description so please take the time to view the images.
A really nice and unusual piece to add to the collection
The knife comes with the high quality cowhide leather and metal sheath in the photos.
PLEASE NOTE THAT AS THIS IS A DOUBLE EDGED KNIFE, LEGALLY, IT IS NOT PERMITTED IN THE A.C.T AND VICTORIA AND WE WILL NOT BE ABLE TO SEND TO YOU SO PLEASE DO NOT ORDER IF YOU ARE IN THOSE STATES.
SOS#002690
-
Last of the really big Pig Spikes from Azero Knives.
Made in Spain by AZERO knives from ACX-380 steel which has been hardened to 56-58 HRC the Spanish-made Azero Pig Spike is a laser cut full tang blade that is built tough for Australian conditions.
With a Micarta handle made from many layers of resin, this handle is almost unbreakable and impervious to oil and humiditiy.
Combined with a leather sheath and leg rope, this knife should be a part of every pig hunters kit.
Total Length of knife is 14" (36cm)
Blade length is 8.5" (21.5cm)
Handle length is 5.5" (14cm)
Thicness of blade is an incredible 5mm making it a hefty strong knife built for pigging.
2 blood grooves on one side and a 3" (7.5cm) hilt to help prevent your hand from slipping forward when wet.
Sheath: Black Leather dagger style sheath with AZERO Logo.
Full tang construction for strength.
Also see sku: SGB6818913W for the 13" and SGB6818915W for the 15" Puma SGB Pig Sticker knives
Limited lifetime warranty against faulty workmanship.
All sizes are approx.
SOS#00195
-
Made in Spain by AZERO knives are made from ACX-380 steel which has been hardened to 56-58 HRC
****Please note as this is a Double Edged Dagger, By State Law, we cannot supply this knife to those living in the ACT or Victoria****
This is a big and beautifully made Double Edged Dagger in the style of a Gladiator or Grecian style blade. Double edged and with a beautiful Ebony hardwood handle.
AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.
Features:
- ACX-380 stainless steel blade
- Leather sheath
- Handle material Ebony Wood
Technical Specifications:
- Overall Length: 340mm
- Blade Length: 210mm (Double edged)
- Weight: 440g
We only have one of these and it has a very nice grain to the wooden handle.
Limited lifetime warranty against faulty workmanship.
-
Made in Spain by AZERO knives are made from ACX-380 steel which has been hardened to 56-58 HRC
AZERO HDM Tactical, Bushcraft, Survival Knife in Molle Compatible Leg/Belt Sheath
This is a fantastic Tactical/Bushcraft/Survival knife.
One of the best solidly built knives we have seen with a 216mm non reflective blade and an overall length of 356mm and a spine of approx 5mm thick.
Solid handle of HDM300 with 3 pins. Blade is full tang and 3 lashing points for use as a spear with the handle point also being used for a lanyard and it comes with a solid plastic lined Black Nylon Sheath with quick release belt attachment and leg fastener and spare pouch for torch or sharpener.
AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.
Features:
- ACX-380 stainless steel blade
- Cordura sheath with Molle system
- Handle material HDM 300
Technical Specifications:
- Overall Length: 356mm
- Blade Length: 216mm
- Weight: 440g
AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.
We only have one of these.
**There is one tiny mark on the blade that can be seen in the blade images from going in and out of the sheath**
Limited lifetime warranty against faulty workmanship.
We also have one of the Medium version of this knife which can be seen in the last image and at this link:
-
Made in Spain by AZERO knives are made from ACX-380 steel which has been hardened to 56-58 HRC
AZERO HDM Medium Sized Tactical, Bushcraft, Survival Knife in Molle Compatible Leg/Belt Sheath
This is a fantastic Tactical/Bushcraft/Survival knife.
One of the best solidly built knives we have seen with a 137mm non reflective blade and an overall length of 277mm and a spine of approx 5mm thick.
Solid handle of HDM300 with 3 pins. Blade is full tang and 3 lashing points for use as a spear with the handle point also being used for a lanyard and it comes with a solid plastic lined Black Nylon Sheath with quick release belt attachment and leg fastener and spare pouch for torch or sharpener.
AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.
Features:
- ACX-380 stainless steel blade
- Cordura sheath with Molle system
- Handle material HDM 300
Technical Specifications:
- Overall Length: 277mm
- Blade Length: 137mm
- Weight: 401g
AZERO Knives - Made in Spain: Despite being only a relatively young company, Azero has a professional background of almost 30years in the cutlery sector. They make high quality knives using steels such as ACX 380 which is known for it’s increased strength, hardness, wear resistance, and toughness.
We only have one of these.
Any marks on the knife and handle are part of the manufacture of this knife.
**Some storage marks on the box**
Limited lifetime warranty against faulty workmanship.
We also have one of the Big version of this knife which can be seen in the last image and at this link:
-
Vintage Bear & Son White Bone Handled 3 Blade Stockman Folding Knife
Made around the early 2000's
*Please read full description and see detailed images that form part of the description
These knives are made in very limited quantities and there are not many out there in the market as most have been snapped up by collectors.
Absolute mint condition with nice opening blades with a nIce tight snap and lovely Genuine Yellow Bone Handle
What a great knife for your pocket or addition to the Bear & Son knife collection.
Description
- Blade Material : High Carbon Stainless Steel
- Handle Material : Yellow/White
- Open Length : 5 5/8″
- Closed Length : 3 1/4″
- Master Blade Length : 2 3/8″
- Spey Blade Length: 1 5/8″
- Sheepsfoot Blade Length: 1 5/8″
- Weight : 1.5 oz.
- Origin : USA
- Extras : Nickel Silver Bolsters
The Bear & Son 218R is a Midsize Stockman with a Yellow/White Bone Handle. The Taper Ground 2-3/8″ Master Blade, 1-5/8″ Spey Blade and 1-5/8″ Sheepsfoot Blade are made from High Carbon Stainless Steel, making them rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 3-1/4″ Rosewood Handle is designed with Stainless Steel Liners and Nickel Silver Bolsters. The Bear & Son 218R has the traditional slip-joint lock that is easy to open and close and nail nicks are present to open the blades. The Bear & Son 218R has an overall length of 5-5/8″ and is perfect for those out on the ranch. 218R weighs 1.5 ounces.
Bear & Son Cutlery a rich, family tradition in knife making.
We have a skilled and experienced work force capable of performing many of the extra hand operations that go into the making of our products. The Bear & Son Cutlery factory is unique. It is full self-contained. While some companies only assemble parts brought from various suppliers and put their names on the product, we do everything in-house from building our own blanking dies to heat treating, grinding and assembly, and hand finishing our products. These steps ensure that Bear & Son Cutlery is of excellent quality and a real value for both the dealer and consumer.
This commitment to excellence has just improved due to rich family tradition in knife making craftsmanship not only by management, but also our experienced work force. Our customers and consumers can look for even more new and exciting products as a result. Our ongoing commitment is to make them in America and make them affordable. We want everyone to be able to afford what we are proud to make!
-
Vintage Bear & Son Medium Sized Folding Lock Knife with Mother of Pearl Inlay
We believe made around the early 2000's
*Please read full description and see detailed images that form part of the description
These knives are made in very limited quantities and there are not many out there in the market as most have been snapped up by collectors.
Absolute mint condition with nice opening blade with a nIce tight snap and lovely Genuine Mother of Pearl Handle
What a great little knife for your pocket or addition to the Bear & Son knife collection.
Description
- Blade Material : High Carbon Stainless Steel
- Handle Material : Genuine Mother of Pearl
- Open Length : 5 1/4″
- Closed Length : 3 1/4″
- Master Blade Length : 2 1/4″
- Weight : 1.2 oz.
- Origin : USA
- Extras : Nickel Silver Bolsters
Bear & Son Cutlery a rich, family tradition in knife making.
We have a skilled and experienced work force capable of performing many of the extra hand operations that go into the making of our products. The Bear & Son Cutlery factory is unique. It is full self-contained. While some companies only assemble parts brought from various suppliers and put their names on the product, we do everything in-house from building our own blanking dies to heat treating, grinding and assembly, and hand finishing our products. These steps ensure that Bear & Son Cutlery is of excellent quality and a real value for both the dealer and consumer.
This commitment to excellence has just improved due to rich family tradition in knife making craftsmanship not only by management, but also our experienced work force. Our customers and consumers can look for even more new and exciting products as a result. Our ongoing commitment is to make them in America and make them affordable. We want everyone to be able to afford what we are proud to make!
-
-
11% less
This is a Gift Tin Pocket Folding Lock Knife with an American Black Bear by a waterfall on the front of the Tin.
Inside is a mirror finish blade pocket folding lock knife with the same Bear scene and a Wolfs Head on both sides of the handle.
Stainless 7.5cm Mirror Finish Blade and it is 10cm closed and 17.5cm fully opened.
Handle is a mix of plastic and Alloy with 4 Sapphire Blue Stones (2 each side)
it is A lovely, collectable gift tin knife and would make a great present or gift.
Only One available.
We also have a similar Bear Folding Lock Knife in Gift Box which can be seen in the final image and also at this link:
-
-
-
7% less
BENCHMADE Rant *Mel Pardue* N690 Stainless Steel Fixed-Blade Knife.Fixed Blade knife.Mel Pardue design.8-1/2 inches long.N690 Stainless Steel blade etched with Benchmade logo on front, "N690", and "Mel Pardue Design" on back.Black rubberized handle."Taiwan" tang stamp.With original black woven nylon sheath with the 'Benchmade' LogoKnife can be disassembled if required by the rear bolt in the hilt of the handlePlease see detailed images.Brand new, unused, unsharpened and untouched. -
-
This is a Bigger and Older 'Used' German Made Bowie Knife Circa 1950's
*Please read full description and see detailed images which form part of the description.
Overall length of the knife is approx 27.5cm long with a Bowie Style Carbon Steel Blade of very solid construction.
The Blade is approx 15.5cm long and 5cm Thick and 3.5cm wide at its widest point.
It is an old knife with a Dull shine blade and is very sharp.At approx around the 70 odd years old, it shows some age with minor surface pitting on the blade and a few handling marks on the Pommel which can be seen in the images.
Beautiful and solid one piece Deer Antler Handle with nice figuring and with spacers and a Brass Finger Guard.
The knife is big and solid and is designed as a hunting knife and could probably tell a good story.
It comes with a hand made solid leather belt sheath with securing stud which is stitched and riveted and is designed to be either a cross over right hand sheath or a left side fitting sheath.We generally would not put some of these older used knives on the website but at 70 years old, it is a classic, solid and well made German Hunting Knife and worthy of a good collector or owner looking for a character quality made knife.
Only one of these has been made.SOS#001750
-
Stunning and rare Browning Hunting Heritage Series Limited Edition Rocky Mountain Elk Foundation knife in wooden Display Case #228 of 550
Rare and 1 of only 550 made and this one is number 228.
Made in Japan for Browning and extremely good quality
Overall length is approx 19.5cm when open and blade length is approx 8.5cm with a closed length of approx 11cm
One side of mirror finish blade reads "ROCKY MOUNTAIN ELK FOUNDATION 2002 BANQUET EDITION" This is engraved in 22 carat gold.
BROWNING 228 OF 550 and the other side reads "JAPAN"
It has a beautifully figured Burlwood handle pinned with brass pins and it has a lanyard hole.
Very rare Japanese Browning knife and made in 2002 so is now 20 year old.
Please see detailed images which form part of the description.
We have placed this in the Rare and Vintage catogary but it is in new condition and totally unused and unsharpened. Couple of little age marks on the wooden box and blade which can be seen in the images.
A really nice collectable piece and 1 of only 550
The handle is made of Burl, with a lanyard hole and the bolsters are made of Nickel Silver.
Made in Japan.
Comes with a solid hardwood display case with two removable feet and a scene of an Elk Stag with a small herd of Elk Hinds on the top with the BROWNING trade mark.
Inside, it has a dark velvet display cut out for the knife and an emblem of the same scene as on the top of the case but in colour.
This is a wonderful piece with a beautiful Browning Japanese made knife and a rare collectable in Australia.
-
Browning Hunting Heritage Series Limited Edition Moose Display Box Model 29 Knife.
Rare and 1 of only 3000 made.
Made in Japan for Browning
Overall length is approx 23cm and blade length is approx 11.5cm.
One side of blade reads "BROWNING 1 of 3000" and the other side reads "MODEL 29 JAPAN"
One side of the Burlwood handle is embossed with the scene of the World Trade Centre in New York and the words 'WORLD TRADE CENTRE 9.11 NEVER FORGET" in a small emblem.
Very rare Japanese Browning knife and circa early 2000.
Pleas see detailed images which form part of the description.
We have placed this in the Rare and Vintage catogary but it is new and totally unused and unsharpened. Couple of little handling marks on the wooden box and blade which can be seen in the images.
A really nice collectable piece and 1 of only 3000
The handle is made of rosewood or walnut wood, with a lanyard hole.
Made in Japan.
Comes with a solid hardwood display case with a scene of two large Moose, the BROWNING trade mark and the words 'Hunting Heritage Series' Limited Edition Moose. and with Browning stamp.
SOS#002750
-
Browning Model 22 Collectable Knife.
1 of only 2000 made and getting increasingly harder to find in mint unused, unsharpened condition.
Overall length is 9 1/4", and the blade length is 5".
One side of the handle is embossed with the scene of two puppies looking at a rifle.
The handle is made of either, Cocobollo, Rosewood or Walnut wood, with lanyard hole.
Made in Japan. Comes with a solid brown sheath with Browning stamp and a nice Suede Knife roll with the Browning Label on the front and Browning metal head on the zipper pull.
This is a superb, and unique Browning model 22 limited edition collectable hunting knife.
With this being one of the finest models bearing the Browning name.
This knife was commissioned by Browning to be a companion to the Browning Model 22 Firearm and is one of only 2000 made and very collectable.
This is beautifully crafted, and handmade and the knife offers quality, craftsmanship, and performance and is a fine custom knife.
Made by Seki in Japan and the very finest in Browning quality. This model was limited to 2,000 examples and was made around 1990 and they were expensive knives back then, usually priced in the $150-$200 USD range.
Like Solingen in Germany or Sheffield in England, Seki City has an 800+ year history of steel and blade making and is still home to a wealth of multi-generational, highly skilled craftsman. Seki is one of the world's foremost hotbeds of high-quality knifemaking and is currently producing some of the finest knives on the planet and one of Japan's most renowned makers is Ichiro Hattori who got his start in his father's shop and then went on to make knives for Kershaw, SOG, Browning, Beretta, and many other before opening his own custom shop. Hattori was the contractor for this model and this knife graphically illustrates why his knives are so sought after. His knives are almost constantly sold out and although customers can be placed on a waiting list, no time table is given. Hattori is now in his 70's and has always put quality and perfection before production. The knife has not been used, carried, or sharpened and remains in perfect condition.
The knife comes in its original padded suede storage case. The knife is just beautifully crafted and is of exceptional quality. The way these knives were made is more like a fine custom than a standard production knife. The attention to detail is outstanding! The knives were hand made by highly skilled craftsman and feature the finest in quality and superb fit & finish. This is one of the larger models and it's also the only model I'm aware of that has a bead-blasted blade finish. The other knives are either mirror polished or have a bright satin finish. The thick blade was precisely ground and has a deep profile. The blade was aggressively ground and displays crisp, clean lines. Both sides of the blade were laser etched in a floral motif. The blade is very sharp and it will shave. The blade steel is likely AUS-8, although I've not been able to verify this. The blade has that certain premium-quality feel to it as well.
The guard was shaped from thick nickel silver and was beautifully executed and the handle is a hard wood of we believe either Cocobollo, Rosewood or Walnut.
*Couple of little storage/age marks on the Leather sheath.
A must for your collection and especially if you love Browning.
Only one of these available.
-
Lovely example of an older Vintage Browning USA made small folding lock back knife with mirror finish blade, Brass frame and Cocobolo hardwood insets.
*Please read full description and see detailed images which form part of the description.
Vintage Browning Sportsman Knife Model 2518F10 Folding Lock Back Pocket Knife
Measures:
14.5cm Fully Opened, 8cm closed and with a 6.5cm Mirror Finished Upswept Blade.
Stamped on the blade is BROWNING USA and this knife was made in the 1980's-early 90's
A few very minor storage marks but other than that, a classic Browning unused, unsharpened and almost as new pocket folding lock knife and a great addition for the Browning collector for those wanting an original and sought after Browning USA made knife.
In 1968, Browning introduced a line of cutlery in the form of 3 fixed-blade hunting knives and a folding knife designed by Custom Knifemaker Gil Hibben.These initial knives were created by Ichiro Hattori in Seki, Japan.Later knives were produced in the USA, Japan and Germany and featured a 2 piece sheath with a leather welt. Some of these knives fetch over $400 USD depending on condition and box, warranty card etc
There seems to be different mention of handle timber ranging from Red Stamina, Cocobolo and Brazilian Rosewood for the Browning Sportsman Series Model and as the knife production ranged for a couple of decades it would seem the the 1980's was when Cocobolo wood was used quite a bit (they later found that the dust when manufacturing was poisonous when handles were being formed and shaped and this caused the death of a few Knife Makers at the time).There was/is no issue once the handle is finished and it was a very popular handle material. -
*Please read full description and see detailed images which form part of the description.
This is a really nice 30 year old mint Buck 1993 Model 692 Vanguard Knife with European Oak or Red Wood Laminated Handle, original Tan Brown Sheath and Original Box
Fully made in the USA which is also stamped on the blade.
Overall length is 8 1/2", with 4 1/8" stainless steel blade.
Full tang blade with a nice factory sharp edge.
Stamped on the blade is BUCK 692 / USA (The '/' mark means it was produced in 1993
Really nice lacquered Laminated European oak or Red Wood coloured wood handle with brass finger guard and brass pommel with black spacers.
Comes with Buck's brown leather 191 belt sheath with Closure Stud.
Made in the Buck factory 30 years ago in the USA and quite hard to find and in mint unused condition.
A really good optimal sized all-round hunting knife and will serve you for years and a nice collectable older Buck knife.
*Box and sheath have a few age marks as can be seen in the images and the stud may have seen a slight repair.
SOS#002990
-
* Please read full description and see detailed images which form part of the description.
Buck 'Memory' Series White Tail Deer Motif made in 1993. Model : 0525-A4
This is a beautiful and collectable small Buck Stainless Steel folding lockback knife with a White Tailed Deer motif on one side and plain stainless on the other side.
Made in the USA with a date stamp showing it was made in 1993
Buck 'Gent' Knife Rare Buck model 525 'White Tail Deer' lockback folding knife with a 1.8" high polish concave grind blade, 4.7" opened with White Tail Deer image.
In original box with paperwork. Made in USA, with 1993 date code.
Length when opened: Approx 12cmLength when closed is approx: 7cm
Blade Length approx: 5cm.
Great original USA made Buck collectable pocket knife.
We also have a Memory Series 'Rainbow Trout' Motif small folding knife which can be seen in the final image and also at this link:
-
* Please read full description and see detailed images which form part of the description.
Buck 'Memory' Series Rainbow Trout Motif made in 1994. Model : 0525-A1-0
This is a beautiful and collectable small Buck Stainless Steel folding lockback knife with a Rainbow Trout motif on one side and plain stainless on the other side.
Made in the USA with a date stamp showing it was made in 1994
Buck 'Gent' Knife Rare Buck model 525 'Rainbow Trout' lockback folding knife with a 1.8" high polish concave grind blade, 4.7" opened with rainbow trout image.
In original box with paperwork. Made in USA, with 1994 date code.
Length when opened: Approx 12cmLength when closed is approx: 7cm
Blade Length approx: 5cm.
Great original USA made Buck collectable pocket knife.
We also have a 1993 Memory Series 'Deer' Motif small folding knife which can be seen in the final image and also at this link:
-
BUCK Custom Shop Limited Edition Frontiersman with Special Bone and Wood Handle.
Stock 0124SISSP4.*Please read full description and see detailed images that form part of the description.
This is a beautiful Custom Shop Buck 124 Frontiersman 'Klink' Special with Factory sheath and Box, new, unused, and has never been carried.
Made to Harold Klinkhamer's (designer of this Knife) specifications.
Harold Klinkhamer, owner Klinkhamer Knife Works, Delphi, Indiana designed some very special knives for Buck USA
This 124 Klink Special is stamped BUCK 124 U.S.A. With the Idaho state symbol
The natural handle material (which is natural and all are different) Is made from polished Deer Antler and Iron Wood and what may seem like any blemishes are a natural part of the Antler and wood.
This is a beautiful one of a kind Knife as they all are a little different because of the natural handle materials that are used.
In an email from Harold Klinkhamer of April 2008 he stated: "I am the designer of this particular Knife and I will give you some details, your buyer may be interested in. This is called the KLINK SPECIAL 122/124 NEMO. There were 67 of them made with serial #'s. Those who bought this second Series were allowed to buy extras. Therefore there are 22 that did not have serial #'s on them of which this is one of them".
So in Total there are only 89 of these beautiful knives made for Buck USA and it is very rare and collectable especially here in Australia.
12" Overall.
6 3/4" 420HC Stainless Steel Clip Blade.
Full Tang Construction With Black Micarta Handle Slabs. Polished Aluminum Hand Guard and Pommel.
Mint in the Std yellow BUCK USA box, with beautiful black leather sheath stamped 124 on the reverse of the sheath.
Limited edition and Made in the USA. (box has been slightly creased due to freight from USA)
Only 1 of these available.
No longer made by BUCK and getting rarer and now hard to find.
Special Edition. Made in USA. Excellent for big game, camping or as a rare BUCK collectable. -
-
10% less
2007 Limited Edition Buck 110 very Collectable Hunter Folding Lock Knife with Pearl Corelon Handle, Black Leather Pouch and original Box.
Please read full description and see detailed images which form part of the description.
This is a Limited Edition magnificent piece and is approximately 4 3/4 inches long (closed) and comes complete with a Lifetime Warranty.
This is a Classic Lockback Folding Knife with a 420HC Stainless Steel Clip Point Blade, and the Tang is Stamped with BUCK 110-1 U.S.A.
The Handles are Custom White Pearl Corelon.Made in 2007 This is one of the BUCK 110 Models but insted of the usual wood handle, this has a beautiful Pearl Corelon handle.
It comes in the original Black Leather Pouch and has its original box and warranty paperwork.
Limited Edition fully made by BUCK USA 2007 and rarer than the standard finish knives
*One tiny age mark one side of the rear Bolster as seen in the detailed images.
-
-
Older and very collectable Buck Alpha Hunter Gut Hook Model number: B276-00-0 with Rosewood Laminated Handle, Ox Blood Red Leather Pouch, original box and warranty card.
Made around 2005-8 and no longer produced by Buck and on the collectors list of best more recently made models.
This one has the Gut Hook Blade and is a harder to get model.
A really solid quality made knife from BUCK USA.
Technical Description:
* Blade Length: 3.5" drop point blade
* Blade Material: Satin Finish ATS-34 Stainless Gut Hook Blade
* Blade: Folding Blade with locking liner
* Overall length: 8.5"
* Length closed: 4 3/4"
* Handle Material: Rosewood Laminate
* Weight: about 210g.
* Sheath: Ox Blood Red Leather Pouch.* Made in the USA.
We also have early fixed blade Gut Hook Blade versions with a Camo Handle and Sheath plus a Rosewood Handle knife which can be seen in the final 2 images and at these links
-
Vintage and collectable Buck OCEANMATE 0127-BK-0 (Catalog 2117) Beautiful Filleting Knife complete with light brown leather sheath and original Buck Box. VERY COLLECTABLE.
Overall length is 35cm with 22cm Blade and 12cm Handle.
Stamped on the Blade is BUCK 127 USA and stamped on the handle and sheath is the BUCK Stamp
Black thermoplastic rubberised grip.
Excellent USA made Filleting Knife
Easy to keep clean. Holds a good edge.
Comes with Tan Brown Leather Belt Sheath with with plastic insert.
In almost mint condition. (Couple of small age/storage marks on the sheath that can be seen in the final detailed image).
Also comes in its original older Buck Box.
Made in USA.
Our Buck Knives are made in the USA and some are older discontinued models that are very collectable.
-
Rare Buck 103 Ducks Unlimited Commemorative Knife in Black Presentation Box.
Overall length is 8 1/4", with a 4" extra wide upswept blade with Aluminium guard and pommel. The tip is narrow, while the curved belly aids in getting through thick layers. Full tang construction. Laminated birchwood handle with cherry finish.
It has a Duck scene on the blade and stamped Ducks Unlimited on the Grey Laminate handle
Comes in a nice Black leatherette Display Box and paperwork ( Displayed in box but no sheath)
Few little storage marks etc in the mould where the knife sits.
Made in the USA. Circa 2010
Now rare and collectable.
-
Rare Buck 103 Hunting Heritage Collection 'Life Member' North American Hunting Club Commemorative Buck Fixed Blade Skinning and all-purpose knife.
This knife is one of a collection of eight world-class knives in the NAHC (North American Hunting Club) Hunting Heritage Knife Collection. Comes with Certificate of Authenticity and Care Instructions.
Overall length is 8 1/4", with a 4" extra wide upswept blade with brass guard and pommel. The tip is narrow, while the curved belly aids in getting through thick layers. Full tang construction. Laminated birchwood handle with cherry finish.
Comes with Ox Brown saddle hand-stitched leather belt sheath.
Made in the USA. Circa 2002-3
Now rare and collectable.
We also have in stock the Bear & Son Guthook Hunter which is another knife in the NAHC Hunting Heritage Knife Collection. Here's the link.
-
-
13% less
Buck 110 Boone & Crockett Club 2015 Commemorative Folding Knife in collectable Tin and paperwork with nylon pouch.
Only a few available so get them before they are all gone.
Due to age, some of the plastic inset mouldings tend to get brittle and break so we have reduced the price accordingly.
Great Folding knife fully made in teh USA.
Buck Hunter Folding Lock Knife. Buck 110. Overall length is 8 5/8" opened, and 4 7/8" closed. Blade length is 3 3/4". Handle is made of brass and hard wood with three brass pins and 1 stainless steel pin. Comes with black nylon belt pouch. Solid folding knife. Made in USA.
The Buck 110 has been Bucks number 1 seller for years and still a quality knife made in the USA
The first Buck knife was produced in 1902 by a young Kansas blacksmith apprentice named Hoyt Buck who was looking for a better way to temper steel so it would hold an edge longer. Hoyt made each knife by hand, using worn-out file blades as raw material. His handy work was greatly appreciated during World War II. After the war, Hoyt and his son Al moved to San Diego and set up shop as H.H. Buck & Son in 1947.
Al Buck revolutionized the knife industry in 1964 with the Model 110 Folding Hunter. The folding “lockblade” knife made Buck a leader. A position Buck proudly holds today.Also see the 2016 Boone & Crockett Buck 110 Folding Knife whilst stocks last.
Also see the final Collectable Buck 110 Tin in the final image. All available whilst stocks last.
-
-
-
13% less
Buck 110 Boone & Crockett Club 2017 Commemorative Folding Knife in collectable Tin and paperwork with nylon pouch.
*Only 1 left and at a special price as the black plastic inset has a crack in it.
2017 Buck 110 Folding Hunter with Collector's Tin
The 2017 knife commemorates the 1887 founding of the Boone and Crocket Club. 2017 will mark 130 years since formation. Buck Knife 110 Folding Hunter knife is a traditional favorite amongst deer hunters. Being the original lockblade knife, it's made of the highest quality material and craftsmanship, featuring a 3 ¾" 420HC steel blade as well as a Macassar ebony Dymondwood handle. Perfect for any situation that may arise in the timber, the Buck 110 Folding Hunter remains a staple in any hunter's arsenal.
FEATURES:
- Traditional favorite amongst hunters
- World's most copied knife
- Folding, lockblade design keeps blade securely locked in place
- Macassar Ebony Dymondwood® handle
- 3 ¾" clip blade made of 420HC steel
- 8 5/8" overall length
- Nail notch on blade easily opens knife
- Brass bolsters
- Comes in Boone and Crockett Club Collector's Series Tin
- Buck Knives
Knife Made in USA.
The Buck 110 has been Bucks number 1 seller for years and still a quality knife made in the USA
The first Buck knife was produced in 1902 by a young Kansas blacksmith apprentice named Hoyt Buck who was looking for a better way to temper steel so it would hold an edge longer. Hoyt made each knife by hand, using worn-out file blades as raw material. His handy work was greatly appreciated during World War II. After the war, Hoyt and his son Al moved to San Diego and set up shop as H.H. Buck & Son in 1947.
Al Buck revolutionized the knife industry in 1964 with the Model 110 Folding Hunter. The folding “lockblade” knife made Buck a leader. A position Buck proudly holds today.Also see the 2016 Boone & Crockett Buck 110 Folding Knife whilst stocks last.
Also see the final Collectable Buck 110 Tin in the final image. All available whilst stocks last.
-
-
-
13% less
Americas Original Buck Model 110 Commemorative Set.
Commemorative Set comes in a solid tin with a nice Buck Folding Knife Pin and a Nylon Pouch.
Limited stock available and no longer made.
Due to age, some of the plastic inset mouldings tend to get brittle and break so we have reduced the price accordingly.
Buck Hunter Folding Lock Knife. Buck 110. Overall length is 8 5/8" opened, and 4 7/8" closed. Blade length is 3 3/4". Handle is made of brass and hard wood with three brass pins and 1 stainless steel pin. Comes with black nylon belt pouch. Solid folding knife made in USA.
The Buck 110 has been Bucks number 1 seller for years and still a quality knife made in the USA
The first Buck knife was produced in 1902 by a young Kansas blacksmith apprentice named Hoyt Buck who was looking for a better way to temper steel so it would hold an edge longer. Hoyt made each knife by hand, using worn-out file blades as raw material. His handy work was greatly appreciated during World War II. After the war, Hoyt and his son Al moved to San Diego and set up shop as H.H. Buck & Son in 1947.
Al Buck revolutionized the knife industry in 1964 with the Model 110 Folding Hunter. The folding “lockblade” knife made Buck a leader. A position Buck proudly holds today.Also see the 2016 Boone & Crockett Buck 110 Folding Knife whilst stocks last.
Also see the final Collectable Buck 110 Tin in the final image. All available whilst stocks last.
-
-
Americas Original Buck Model 110 Commemorative Set.
Commemorative Set comes in a solid tin with a nice Buck Key Ring and a Nylon Pouch.
Limited stock available.
Buck Hunter Folding Lock Knife. Buck 110. Overall length is 8 5/8" opened, and 4 7/8" closed. Blade length is 3 3/4". Handle is made of brass and hard wood with three brass pins and 1 stainless steel pin. Comes with black nylon belt pouch. Solid folding knife made in USA.
-
Special Limited Edition Buck Custom Shop Ducks Unlimited 50TH Anniversary Buck 110 in Wooden Display Box
Made by the BUCK Custom Shop in USA.
Comes in beautiful wooden display box
Hurry only one available. Very rare and probably the only one in AustraliaThis magnificent piece comes in a collectors wooden display box commemorating the 50th anniversary of Ducks Unlimited. 1937-1987 50th Anniversary
The knife is the Classic Lockback Folding Knife with a 420HC Stainless Steel Clip Point Blade, approximately 4 3/4 inches long (closed) and comes complete with a Bucks Lifetime Warranty.
Written on the special mirror finish Blade in 22carat Gold is 1937-50 YEARS of WETLANDS COSERVATION-1987
On the hilt of the blade is stamped BUCK CUSTOM USA
This knife is in mint condition showing just a few minor age marks which can be polished out.
It has been left in original condition and the images form part of the description. Shading and reflections etc are just due to the light when the photographs were taken.
The box is solid wood with a glass lid and a foam inset for the knife to be displayed on.
There are a few marks on the foam where the knife has been sitting.
A very nice piece to add to the BUCK Knife collection.
-
Special Limited Edition Buck Custom Shop Ducks Unlimited 50TH Anniversary Buck 110 in Box
Made by the BUCK Custom Shop in USA.
Comes in a Card Box with Foam inset
Hurry only one available. Very rare and probably the only one in AustraliaThis magnificent piece commemorates the 50th anniversary of Ducks Unlimited. 1937-1987
The knife is the Classic Lockback Folding Knife with a 420HC Stainless Steel Clip Point Blade, approximately 4 3/4 inches long (closed) and comes complete with a Bucks Lifetime Warranty.
Written on the special mirror finish Blade in 22carat Gold is 1937-50 YEARS of WETLANDS COSERVATION-1987
On the hilt of the blade is stamped BUCK CUSTOM USA
This knife is in mint condition showing just a few minor age marks which can be polished out.
Never carried, Sharpened or used.
It has been left in original condition and the images form part of the description. Shading and reflections etc are just due to the light when the photographs were taken.
There are a few marks on the box where the knife has been sitting.
A very nice piece to add to the BUCK Knife collection.
-
Matco Tools Motorsports Limited Edition Buck 110 Collectors Knife
Unique and hand made by Buck Knives USA. 1 of only 1500 made.
Knife handle is etched on one side with the likeness of the Matco/Skuza Nitro Funny Car and is Gold Plated and on the other side a replica of Deans Signature and also personally signed by him on the blade.
(Dean autographed this knife on the blade in person at Bandimere Speedway in Morrison Colorado).
The knife’s bolsters are engraved and enhanced with 24 karat gold inlay
Made in USA.
Comes in beautiful Walnut wooden box and original Matco cardboard box.
Very rare and the only signed one in Australia
See detailed description and images. -
Matco Tools Motorsports. Limited Edition Collectors Knife
Unique and hand made by Buck Knives USA. Numbered 2696 of only 4000
Knife handle is etched on one side with the likeness of the Matco/Skuza Nitro Funny Car and on the other side a replica of Deans Signature.
The knife’s bolsters are engraved and enhanced with 24 karat gold inlay
Made in USA.
Comes in beautiful Walnut wooden box and original cardboard box.
Very rare and probably the only one in Australia
See detailed description and images.
Hurry only one available so drop us an email to secure. -
-
10% less
Buck US Air Force Collectable Hunter Folding Lock Knife. Buck 110 with sheath.
Made in USA.
1 of Only 400 Made. Number 123.
Special AIR FORCE Model.
See detailed description and images.
Only one available.
Pouch and Knife but no box -
-
-
5% less
Buck General Model 120, Big Hunting Knife.
This is the bigger version of the most popular fixed blade knife, the Buck 119 Special.Buck General 120 knife with Cocobolo Dymondwood handle. The Buck General has a long blade enhances the exquisite appearance, while creating a hunting knife that makes de-boning a lot simpler.
Overall length is approximately 12" with a 7 3/8" 420HC steel clip blade with a blood groove. Rockwell hardness: 58. Brown Cocobolo Dymondwood handles with brass guard and pommel.
420HC steel is Buck's standard blade material because it approaches the wear resistance of high carbon alloys while delivering the corrosion resistance of chromium stainless steels. Add Buck's heat-treat process and you have a very user-friendly combination of superior corrosion resistance with excellent strength for wear resistance and durability. You also have a blade that is easy to resharpen.
The clip blade with the crescent tip makes the blade thinner with a sharper point. This shape provides good control for detail work and cutting in tight places. It is also well suited for intentional punctures like new holes in your belt, etc. While the point of the blade is effective for detail work, it is not as strong as the thicker points on drop points and skinners.
Comes with hand-stitched leather belt-looped sheath in Burgundy/Dark Ox Blood Colour.
The Exclusive, elite, and luxurious, the General remains an exceptional choice for a hunting knife or simply as a collectible.
Made in the USA.
Our Buck Knives are generally made in the USA and some are older discontinued models that are very collectable. Sometimes the boxes show storage marks but all knives are brand new.
We also have the Black Handled model 120 General as seen in the last image and available at this link:
https://www.sportingoutbacksupplies.com.au/buck-knife-buck-120-general-hunting-knife.html
-
-
-
14% less
Buck General Model 120, Big Hunting Knife.
This is the bigger version of the most popular fixed blade knife, the Buck 119 Special.The Buck 120 offers traditional elegance in an all-purpose bigger knife.
Overall length is 11 3/4" with a 7 1/4" 420HC steel blade with a blood groove.
Rockwell hardness: 58.
Black Phenolic handle and silver-finished pommel and guard.
Comes with hand-stitched black leather belt-looped sheath.
Made in USA.Our Buck Knives are generally made in the USA and some are older discontinued models that are very collectable.
Sometimes the boxes show storage marks but all knives are brand new.
We also have the Buck 120 General in Cocobolo Dymondwood which can be seen in the last image and is available at the link below:
-
-
BUCK Limited Edition Frontiersman. Stock #B-124BKSLE. 12" Overall. 6 3/4" 420HC Stainless Steel Clip Blade. Full Tang Construction With Black Micarta Handle Slabs. Polished Aluminum Hand Guard and Pommel. New in the black limited edition box with beautiful black leather sheath.
Limited edition and Made in the USA.
Only 1 available. -
BUCK Limited Edition Frontiersman.
Stock 0124BKSLE. 12" Overall. 6 3/4" 420HC Stainless Steel Clip Blade. Full Tang Construction With Black Micarta Handle Slabs. Polished Aluminum Hand Guard and Pommel.
New in the Std yellow BUCK USA box, with beautiful black leather sheath stamped 124 on the reverse of the sheath.
Limited edition and Made in the USA. (box has been slightly creased due to freight from USA)
Only 1 of these available.
No longer made by BUCK and getting rarer and now hard to find.
Special Edition. Made in USA. Excellent for big game, camping or as a collectable.SOS# 00249
-
Buck Custom Made 192 Virginia Game Warden Vanguard knife.
Made in the USA and in absolute mint condition in original box with paperwork.
'Virginia Game Warden 1996 15th Edition 1 of 350' stamped on one side of the blade along with the number 333 and BUCK 192 USA
This is number 333.
Overall length is 8 1/2", with 4 1/8" stainless steel blade.
Full tang.Laminate wood handle with brass finger guard and brass pommel.
Virginia Game Warden Motif and wording on side of handle and also on the sheath.
Limited edition 1996 knife from the Buck Custom Shop.
Comes with Buck's brown leather belt sheath, box and paperwork.
Made in the USASOS Code: 00285
-
This is a custom made knife by BUCK as a 1993 Duck Unlimited commemorative 192 model knife. It has a laser-etched picture of a pair of mallard drake and duck on the blade. The overall length is 8 1/2", with a 4" 420HC Stainless Steel blade and cocobolo handle. Made in the USA. Comes in a brown tanned leather hand-stitched custom sheath.
-
-
14% less
Buck Mini Alpha Hunter with Camo Handle.
Overall length is 6 3/8", with 2 1/2" mirror polished 420HC stainless drop point blade.
Full tang.
With hard Plastic Camo finish Handle.
Comes with Camo finish Nylon belt sheath.
Made in 2007 in the USA and now very collectable
We also have a Cocobolo Wood Handled version which can be seen in the final image and at this link:
-
-
-
8% less
2004-7 Circa Buck Mini Alpha Hunter with Cocobolo Hard Wood Handle.
*Please read full description and see detailed images.
Almost mint unused and unsharpened condition with just a few minor age marks as can be seen in the detailed images.
Overall length is 6 3/8", with 2 1/2" mirror polished ATS-34 High Tech stainless steel and a drop point blade.
Full tang.
With Cocobolo Hard Wood Handle.
Comes with Ox Blood Red Leather Belt Sheath and original Box.
Made in 2004-7 in the USA and no longer produced and now very collectable.
We also have a Camo version which can be seen in the final image and at this link:
https://www.sportingoutbacksupplies.com.au/buck-knife-buck-196-mini-alpha-hunter-camo-handle.html
-
-
Older and collectable 1995 Buck 102 Woodsman fixed blade knife with Black Phenolic Handle, Black Leather Sheath. (No Box)
*Please read full details and see detailed images which form part of the description.
This is a nice mint example of a 1995 Buck USA Made 102 Woodsman model.
It has the 'C' mark on the blade which from the Buck dating chart is 1995 and it has a lovely Black leather sheath with the word 'BUCK' stamped diagonally where the new model Bucks are stamped horizontally.
Mint condition, unused and unsharpened and nearly 29 years old. A nice knife for the BUCK collector.
Blade length is 4", and overall length is 7 6/8".
Comes with a black leather sheath
Nice little Hunting knife.
Made in the U.S.A.
We also have available current models which can be seen in the final image and also at this link:
-
This is a nice older collectable Buck 1997 Model 692 Vanguard Knife with original Nylon Sheath.
This one has the more collectable sheath with the BUCK logo sewn diagonally (newer models have the BUCK logo sewn horizontally)
Mint, unused condition.
Fully made in the USA which is also stamped on the blade along with 692 USA and the 1997 Buck manufacturing stamp.
Overall length is 8 1/2", with 4 1/8" stainless steel blade.
Full tang blade with a nice factory sharp edge.
Nice solid rubberised anti-slip handle with brass finger guard and brass pommel.
Comes with Buck's Black Nylon 191/192 belt sheath with Closure Stud.
Made in the Buck factory 27 years ago in the USA and quite hard to find in this condition.
No box with this knife.
A really good optimal sized all-round hunting knife and will serve you for years.
-
Older 2004 manufacture 19 year old and original Buck Special Model 119 Hunting Knife.
*Please read full description and see detailed images.
This is Bucks most popular fixed blade knife, the Buck 119 Special.
Buck 119 Special Hunting Knives Fixed Blade Knife Genuine Black Leather Sheath and original box.
Made in 2004 and 19 years old brand new unused knife
This classic large hunting knife has been a super seller going back some 47 years. Hoyt and Al Buck used to build them by hand in their two-man shop. Today, this larger hunting knife with a large clip blade for detail work, piercing and cutting in tight places for added control, is as popular as ever.
Specifications Blade Length: 6″ (15.2 cm)
Blade Material: Satin Finish 420HC Stainless Steel
Carry System: Black leather sheath
Handle Material: Phenolic
Quantity: Yes
Weight: 7.5 oz. (213.5 g)
Made in USARockwell hardness: 58.
Black Phenolic handle and silver-finished pommel and guard.
Comes with hand-stitched black leather belt-looped sheath.
Made in USA.Our Buck Knives are generally made in the USA and some are older discontinued models that are very collectable.
**This knife was made in 2004 but the knife is still brand new and unused.
Please note it has the slightly older Yellow and Black Buck Box shown in the first 2 images and not the newer box shown in the other images. The knife is exactly the same.
-
-
13% less
Buck Special Model 119 Hunting Knife.
This is Bucks most popular fixed blade knife, the Buck 119 Special.Buck 119 Special Hunting Knives Fixed Blade Knife Genuine Black Leather Sheath
Please Note: Made in 2004 and 20 years old brand new knife in original sheath
This classic large hunting knife has been a super seller going back some 47 years. Hoyt and Al Buck used to build them by hand in their two-man shop. Today, this larger hunting knife with a large clip blade for detail work, piercing and cutting in tight places for added control, is as popular as ever.
Specifications Blade Length: 6″ (15.2 cm)
Blade Material: Satin Finish 420HC Stainless Steel
Carry System: Black leather sheath
Handle Material: Phenolic
Quantity: Yes
Weight: 7.5 oz. (213.5 g)
Made in USARockwell hardness: 58.
Black Phenolic handle and silver-finished pommel and guard.
Comes with hand-stitched black leather belt-looped sheath.
Made in USA.Our Buck Knives are generally made in the USA and some are older discontinued models that are very collectable.
*This knife was made in *2004 is brand new and unused and unsharpened with its factory edge.
(No Box)
*(See date chart for details)
-
-
This is a nice older Buck 2005 Model 692 Vanguard Knife with original Nylon Sheath.
Mint, unused condition.
Fully made in the USA which is also stamped on the blade along with 692 USA and the 2005 Buck manufacturing stamp.
Overall length is 8 1/2", with 4 1/8" stainless steel blade.
Full tang blade with a nice factory sharp edge.
Nice solid rubberised anti-slip handle with brass finger guard and brass pommel.
Comes with Buck's Black Nylon 191/192 belt sheath with Closure Stud.
Made in the Buck factory 18 years ago in the USA and quite hard to find in this condition.
No box with this knife.
A really good optimal sized all-round hunting knife and will serve you for years.
SOS#002250
-
Older and collectable 2005 Buck 102 Woodsman fixed blade knife with Black Phenolic Handle, Black Leather Sheath. (No Box)
*Please read full details and see detailed images which form part of the description.
This is a nice almost mint example of a 2005 Buck USA Made 102 Woodsman model.
It has the Anvil mark on the blade which from the Buck dating chart is 2005 and it has a lovely Black leather sheath with the word 'BUCK' stamped horizontally.
Almost mint condition, unused and unsharpened and nearly 19 years old. A nice knife for the BUCK collector. (Few very minor storage marks here and there)
Blade length is 4", and overall length is 7 6/8".
Comes with a black leather sheath
Nice little Hunting knife.
Made in the U.S.A.
We also have available current models which can be seen in the final image and also at this link:
-
-
15% less
Buck Special Model 119 Hunting Knife.
This is Bucks most popular fixed blade knife, the Buck 119 Special.Buck 119 Special Hunting Knives Fixed Blade Knife Genuine Black Leather Sheath.
Please Note: Made in 2006 and 17 years old brand new knife in original sheath
Has a couple of minor storage marks on the Pommel and sheath which is reflected in the discounted price.
This classic large hunting knife has been a super seller going back some 47 years. Hoyt and Al Buck used to build them by hand in their two-man shop. Today, this larger hunting knife with a large clip blade for detail work, piercing and cutting in tight places for added control, is as popular as ever.
Specifications Blade Length: 6″ (15.2 cm)
Blade Material: Satin Finish 420HC Stainless Steel
Carry System: Black leather sheath
Handle Material: Phenolic
Quantity: Yes
Weight: 7.5 oz. (213.5 g)
Made in USARockwell hardness: 58.
Black Phenolic handle and silver-finished pommel and guard.
Comes with hand-stitched black leather belt-looped sheath.
Made in USA.Our Buck Knives are generally made in the USA and some are older discontinued models that are very collectable.
*This knife was made in *2006 and has a few age marks on the sheath but the knife is brand new and unused and unsharpened with its factory edge.
*(See date chart for details)
-
-
2006 Buck Custom Shop Model 303 CADET knife with gorgeous real stag Antler Scale Handle.
*Please read full description and see detailed images that form part of the description
These knives were only made in the Buck Custom Shop on a very limited bases and there are not many out there in the market as most have been snapped up by collectors.
Absolute mint condition with nice opening blades with a nIce tight snap and lovely Deer Antler Scales.
According to the date stamp, this one was made in 2006.
Wow what a great knife for your pocket or addition to the BUCK knife collection.
-
Buck Special Model 119 Hunting Knife.
This is Bucks most popular fixed blade knife, the Buck 119 Special.Buck 119 Special Hunting Knives Fixed Blade Knife Genuine Black Leather Sheath and original box.
Please Note: Made in 2011 and 11 years old brand new knife in original box.
Has a couple of minor storage marks on the Pommel and sheath which is reflected in the discounted price.
This classic large hunting knife has been a super seller going back some 47 years. Hoyt and Al Buck used to build them by hand in their two-man shop. Today, this larger hunting knife with a large clip blade for detail work, piercing and cutting in tight places for added control, is as popular as ever.
Specifications Blade Length: 6″ (15.2 cm)
Blade Material: Satin Finish 420HC Stainless Steel
Carry System: Black leather sheath
Handle Material: Phenolic
Quantity: Yes
Weight: 7.5 oz. (213.5 g)
Made in USARockwell hardness: 58.
Black Phenolic handle and silver-finished pommel and guard.
Comes with hand-stitched black leather belt-looped sheath.
Made in USA.Our Buck Knives are generally made in the USA and some are older discontinued models that are very collectable.
**This knife was made in 2008 and has a few age marks on the sheath and on the box but the knife is brand new.
We also have the Buck 120 General in Black and Cocobolo Dymondwood which can be seen in the last images and is available at the links below:
-
This is a nice Buck 2012 made Model 192 Vanguard Knife with original Sheath and box
Fully made in the USA which is also stamped on the blade.
Overall length is 8 1/2", with 4 1/8" stainless steel blade.
Full tang blade with a nice factory sharp edge.
Really nice lacquered Laminated European oak coloured wood handle with brass finger guard and brass pommel with black spacers.
Comes with Buck's brown leather 191/192 belt sheath with Closure Stud and original box.
Made in the Buck factory 10 years ago in the USA and brand new, unused and in original box.
Box shows a few storage marks.
A really good optimal sized all-round hunting knife and will serve you for years.
-
Buck Model 309 2-Blade folding Knife. The main blade is a clip point blade which measures 2 1/4" long. The other blade is a spey blade which measures 1 5/8" long. The knife is 3" long when closed. Custom handles feature inlay of blue turquoise and lapis lazuli.
Made in the USA.
